take a fin out - take a picture so we can see the screw setup...
and replace with new bolts n board just kidding
Ha ha ha Dud
I would but my job requires me to uphold the W.A Economy
Im guessing the fins are a mini tuttlebox from the single bolt by the foot pads ??? if so Airborne kitesurfing W.A has a small box of oldies that may do the trick - if you send them a bit of economy boosting Moolah
Thanks Dude, for sacrificing your board to the wind gods. Looks as though it's worked for this weekend.
When we were young it was common practice to set an old board on fire and set it adrift to bring up the swell. Worked every time.
One day back in December my board decided to take a long deep water swim without me,after about an hour of seaching by the lifeguards on a jet ski and me looking with bino's.
It hid up along the rocks,reckon fin was cracked but didn't see this,next kite fin snapped at base on shallow sand bank.
I am also a KOOK which did not help.
such is life
It is a mini tuttle my best surf board uses them it has slingshot fins
or you could try these
www.surfdome.com/