Send Message
Weather | Buy&Sell | Forums |  |
Weather | Buy & Sell | Gallery | Forums | |
Score one for the good guys !
Installed the VHF, fitted antennae and Marine Rescue Solander read me 'Loud & Clear'.
One happy chappy !!!!!!!!!!!!!!!!!!
Removed the tiller off the clansman on Saturday to sand it down and re-varnish, regretted taking it off on Sunday when the weather was the best we have had for quite a while. Meanwhile the tiller is looking great, first layer of varnish on, photos to come when finished.
Got notification from the RMS that I am next in line for a mooring in Burraneer Bay, Port Hacking. Hopefully a few weeks will see it done.
Drank more beer and admired my handy work..... My $22k bargain cheap boat that I spent close to $60k on!!!!! Might have to go sailing !!
Actually 5 years on more like $100k
@ south ace....being a fairly poor cash strapped bogan....I would have been really happy ( sad me!..he he) with the boat before you did the renovation work. Sorta had that old nautical feel about it my missus really hates. Think I've seen so many dark smelly brown wooden corroded brass stained cushion interiors I have gotten used to them. 
I better sort myself out...just quietly....
Sorry ! I kinda know what your saying....I have seen it all.... But when sh#t needs to work I want it to work.(most of the times)..... and a hot shower and plush cushions and a working toilet, And a soft bed! And a diesel that starts! ...life is short! Follow your dreams !....And besides that's what the female species wants to keep them happy.
And being the cash strapped bogen myself and if I put to sea with what I had, I most properly needed a rescue by now....haha
Oh come on really I don't drink that much ice cold beer especially now I'm in the warm tropics!
Keep a good eye on that stainless muffler/mixing box.
Stainless does not stand up to hot salt water mixed with exhaust gasses.
I had one similar that rotted out and I ended up just having a stainless mixing elbow feeding straight into rubber exhaust hose with no water trap. That worked for my yacht but may not suit other configurations.
Excellent job on the yacht otherwise.
Firstly, let me say great thread, thanks boatin for kicking it off.
Today was getting rid of the rust stains of my stainless steel rudder stock. Prior to this, it had been untouched for 2-3 years, so it looked pretty awful. It had that tea-stain look all over the stainless, and I initially attempted to clean it by:
1) Warm water and mild detergent. Fail.
2) White vinegar. Fail
So I did a bit more research and took a punt on Septone Rust Converter (phosphoric acid), mainly as Supercheap was open and had it on the shelf.
I applied it with a soft paint brush, left for 15 mins, then wiped it off with a damp rag, then wiped it over with metho on a rag. Did this half a dozen times, and amazingly it worked very well.
It is not perfect yet, but I wish I had of taken a before shot, it is amazing the difference it made.
While I as waiting , I sanded back the wooden tiller and started applying some marine varnish. I thought the end product was pretty good, that is till I saw what Southace is doing !!!
SB
Sanded and varnished the cockpit timber and then painted the fridge and kitchen timber prep areas tommorrow the deck rust prep work will be started. the end of the week sailing in the Cumberland Group Islands which one to stay I don't know yet maybe Scawfel island
Well deserved drinks.......but after snapping a raw water fitting on my engine and not being able to track down why my batteries are going flat!! Made the red, cheese and bickies taste even better though
Went and pottered for an hour or so, absolutely beautiful day.
Unfortunately too early for the cheese and biccies and a glass of red.
Got everything ready for the MAIDEN Voyage....hurrah!!!....
Big time stuff!!
Put sails on, eskies, loads of crap and paraphernalia that women seem to need that doubles boat weight....
The boat left its little pen for the first time in years.
Fast forward five minutes.......David is over the side up to his neck in water and knees in mud pushing boat off mud bank.
Channel markers never been moved in years. Channel about thirty meters to the north.
Got back to the pen/jetty. Due to the tide going out...the boat didn't want to go back into its pen. The creek totally dries out at low tide. Kill me now...stress levels at maximum.
Used main halyard winch to pull boat in. What a farked up day. 
You should have checked your horoscope before you set out !!!!!!
It probably would have said something like this
'If you go out in the boat today,
You're in for a big surprise'
Apart from all that you probably learnt a little bit !!!
I'm a practical chap. Nothings too hard, no need to stress out and I''ve been doing martial arts n stuff for years. Nothing rattles my cage really. Yesterday rattled my cage. And I think I was becoming quite annoying to those around me. So I had to pull my head in and say " I learnt something today and I will go forward from here" so you are dead right boatin. Your remark was spot on mate.
Started the motor on sunday morning so i could bring the boat into the jetty to use some power tools and the usual stream of water was absent from the exhaust. Checked the filter, all looked ok, thought the water pump impeller might be nackered. Took the hot water pipe off the exhaust elbow and started the motor, a steady stream of water came out, so i found my culprit. Removed the exhaust elbow and the hole where the water comes in to cool the exhaust is all gunked up with soot and crust.
Anyone know best way to clean it up.
Is it that small threaded portion on the left of the picture? Perhaps a small drill bit to clean out most of it then a run a tap down the threads.
Or maybe try to burn it out with a blow torch.
Tap the mixing elbow with a 1/2 lb hammer to make sure it still rings.
If it don't ring the guts of the metal has been leeched out it, it has become porous and brittle and will fail soon.
It would be quite simple to fabricate another mixing elbow from stainless plate and a s/s elbow with a water injection point welded in pointing in the direction of flow.
This section on most engines is made from cast iron and is sacrificial. Clean it out with an old screw driver and check whether you can drive the screw driver though the side, As Cisco mentioned there is sometimes not much steel left. Looks like an easy bit to make in SS.
This is caused by the engine idling for long periods with no load. When you flash up the iron topsail, run it at about 80% in gear.
Thx for the advice, I will tap with hammer and see if solid or not.
This is the only part that was'nt replaced when I got the fully reconditioned motor, and in fact just after I had the motor installed the T piece that used to tap off some water before it got to the elbow clogged and I bypassed that.
What would it roughly cost to have it fabricated in SS.
Not on Pisco Sour today but I got stuck into finishing the tender. I am next on the list for a mooring in Burraneer Bay and until I finish the tender I have no way of reaching the mooring. Hopefully I will have it finished when the mooring is dropped in.
