Forums > Stand Up Paddle General

PSH 12 foot Gun Fin Set

Reply
Created by Daneli > 9 months ago, 22 Jan 2010
Daneli
QLD, 1538 posts
22 Jan 2010 11:14AM
Thumbs Up

I am looking at changing the plastic fins my PSH 12 Gun came with to an FCS quad set up. Any recommendations on fin size?

Thanks

SammyJ
WA, 570 posts
22 Jan 2010 3:12PM
Thumbs Up

Daneli said...

I am looking at changing the plastic fins my PSH 12 Gun came with to an FCS quad set up. Any recommendations on fin size?

Thanks


The topic has PSH in it not to mention the 12ft size and no response for nearly 6 hours...WTF where's Hilly, Phil, AA, Blane and the kiwi dude.

I don't know a great deal about PSH but I thought the 12er was a thruster set up, looking at quads. The Sunny Garcia fin could be a good starting point

hilly
WA, 7319 posts
22 Jan 2010 3:23PM
Thumbs Up

SammyJ said...

Daneli said...

I am looking at changing the plastic fins my PSH 12 Gun came with to an FCS quad set up. Any recommendations on fin size?

Thanks


The topic has PSH in it not to mention the 12ft size and no response for nearly 6 hours...WTF where's Hilly, Phil, AA, Blane and the kiwi dude.

I don't know a great deal about PSH but I thought the 12er was a thruster set up, looking at quads. The Sunny Garcia fin could be a good starting point


Kiting!!

Thought it had been done to death. Try a search here and on zone heaps on fins try to borrow fins to try.

I stuck with the thruster set up found the quad did not improve the performance of my 10er.

Vector sides and 6.5 centre seems best for me.



Edit - found these I tried small fins in the back too but lacked drive bigger felt better but thruster better.







Marvin
WA, 725 posts
22 Jan 2010 4:33PM
Thumbs Up

Is there any issue about leaving those unused slots right in the working area of the board?

Is there any benefit in taping them off?

OG SUP
VIC, 3516 posts
23 Jan 2010 9:06AM
Thumbs Up

I have never tried the gun as a quad, it shreads as a thruster.

I think my set up and Hilly's just about the same. Sunny Garcia or PC7 sides wiith a 5 1/2 or 6 center. I also ride it with PC7s all round.

Last night I had 3 hours of rediculous fun at OG on the gun in knee high to waist high glass. Kristi and I surfed till about 10pm. What a way to end a sh!ty day.

I almost got the 360 happening just can't get it back to the beach without the leggie taking me out.

With small fins you can make this boards tail slide right out in cutties and side slip down the wave its the BOMB for big units!

Mr Chompy Rules nough said.

Phill


hilly
WA, 7319 posts
23 Jan 2010 7:10AM
Thumbs Up

downwind said...

Is there any issue about leaving those unused slots right in the working area of the board?

Is there any benefit in taping them off?


Not that I have noticed could tape them or make an insert.



Subscribe
Reply

Forums > Stand Up Paddle General


"PSH 12 foot Gun Fin Set" started by Daneli