11-12' something..............maybe take up Bob's offer of a custom shaped one???
6'2 Hybrid round tail, 8'11 666, 14' dugout 666, Log Mal, wind surf board, oc1
Last 2 are long shots right now, 1st 3 will be done very soon....
Select to expand quotevanders1 said..
11-12' something..............maybe take up Bob's offer of a custom shaped one???
11 is enough Vanders!
Pinnacle 9.6 x 23 1/4? x 3 1/4? tint with glassed in fin, red tint wrapped around the rails with gold pin line and double stringer.
maybe a 14' tomy.
a dw run on the tomy saturday afternoon blow me away. like was was a standup oc1 or something. speed, drive and lift
and well, i haven't used my 8'8 666 for so long. it's like it seems too much hard work to bothered
i was on my cw hotlog, which i'm loving, at coolie on the weekend i was watching a couple of guys on short 666's and i couldn't help thinking how stupid it looked as they half paddled , half tripped around with their legs looking all bowed and stiff as wood.
i mean it suppose to be a paddle thing but what's the point if you can barely paddle them.
worse thing that ever happened is when some bright sparks decided to start going under ten foot in length imo.
with all the training and dw ing its just nice to hop on a board without a paddle for a change
ps i will still surf my 12'6 always
I have 4 boards Batmac ... 9'3" Goddard & 9'1" BM and a 8'1" Minimal which I need to start riding more , I also have a 9'0" Lopez 666 which I ride quite a bit only for surf though
.... like the Lopez coz I ride it far better than a LB and because I can take on overheads with it , and because I can get out regardless
No upgrades or additions just yet going to wait keep doing what I'm doing for a bit .... just want to surf so no DW'ers
Well I have a 5'11 v-channel twin fin waiting to be glassed and 7'0 single fin that need the rails shaped and then glassing so I guess those two are next then I think I will go for :
6'2 High performance shorty
10'6 Log
and the then I might have a crack at 8'6 or a 9'6 gun if I can get my hands on some templates
Select to expand quotesmh said..
Id love to say a Tak DT4 but it will probably be another 666.
Sean is now officially in the dark side 
Mac I am pretty sure you said just a few days ago that your quiver was now complete for a while
I have so many boards that I want to make that it is out of control - I will be risking a quick fire divorce if I go forward with my plans....but yes I will as I am fearless Next board will be a single fin based of a JT Diamond Egg around the 6'9" length. Then I am going to have a crack at making a vanguard type shape if all goes to plan. I have been trying to get my hands on a 10 foot second blank for a few months now and I happen to get my hands on one it shall move up to the front of the queue - a dedicated nose rider for those 1 to 2 ft small summer days.
Don't let the idea of quick divorce interfere with your dream Ted. You only go around once. Just do it. Yes I guess I'm on the dark side now but I ride it like a mal. Was doing a bit of cross stepping yesterday from the middle to the back of the board but will have to put some wax up on the nose soon. You could fit barbecue furniture up on the nose of this board.
Mac is becoming a logger 
How very hip 
. Do you reckon you might get to ride one of these Pinnacles before you order ? Glass in fins are nice though.
Select to expand quoteTux said..
Well I have a 5'11 v-channel twin fin waiting to be glassed and 7'0 single fin that need the rails shaped and then glassing so I guess those two are next then I think I will go for :
Got any pics? Sounds like its time you started a new build thread
Mac, your latest design would look really sweet on The Pinnacle... 
The Pinnacle is partially a result of Bob's work on the Occasional Pins. I prefer the narrower nose that the Occasional Pin model tends to get.
But the wider nose will suit smaller waves better... Narrower nose handles the juice better, yet still goes along nicely in the small stuff.
It would Simondo but I would go for this,nice red bottom and rail tint in red doubled stringer with gold pin,deck patch as per picture with glassed in fin.
Just a classic look imo.
Select to expand quoteTed the Kiwi said..
my mate needs a new stick - parted company with his old favourite on Friday 
I hope you templated that!!!
Next board is a secret
Am hoping to put an order in today for a 6' x19 1/2x? Hp.
I also want a 9'6 whalebone and a sweet potato type board. But the big one I want is a windsurfer. With cmc the last one might be a while sadly
Select to expand quoteMalo said...
The psychedelic Duck.....
And that is a cool.as **** board Mr goddard
Yeah add one of those Vanguard thingies to my list plus my kids both want boards and I need to make a couple of wakesurfers for summer........I hope my wife is not checking seebreeze
Select to expand quoteTux said..
I hope you templated that!!!
I already have a POD myself and its been templated and the result is here........I just changed the tail as I am sick of fixing swallows up
For me next one , looking now so in the near future , will be a 666 around the 8-6-9 foot length , quad setup , short board shape .
Have done my back in so the longboards are in for a decent rest in the garage but the 666 boards are coping a flogging .
Have a 9 5 Jimmy Lewis Striker - longboard type SUP and a 9 2 PSH set up with quads , really enjoy both but as you all know always looking for something better .
Thinking Jimmy Lewis Kwad / Naish Hokua / Fanatic Prowave .
I've just bitten the bullet and ordered a modern day log with a real classic look.
I'm blaming Lacey for this one
Did this today....
So just bought this one from the shop while anxiously awaiting my custom 8'0 McT hand shaped by Bob - approx 4 wks to go
^^^^
Pic 1 .... ouch that isn't a good thing 
Pic 2 .... yeeehaaaa that is a good thing 
Select to expand quote62mac said..
I've just bitten the bullet and ordered a modern day log with a real classic look.
I'm blaming Lacey for this one
The EVOII has gone to a new home
