Forums > Surfing Longboarding

unrelated shed junk

Reply
Created by Prawnhead > 9 months ago, 3 Sep 2012
Prawnhead
NSW, 1317 posts
3 Sep 2012 6:12PM
Thumbs Up

Shed cleanup...annual event that goes for a year!!
ruthless ,hard nosed ,no stone left unturned throwout!

(....unless of course there might be a use for that item a little down the track)

old trestle ,some pieces of structural pine and about a dozen pieces of 2x2 ,origin and type unknown
into the trailer with you ......

you know i could knock up a FREE(ok a trip to bunnings for varnish, glue ,sandpaper and threaded rod about $25 )table with that in a couple of hours
despite having no woodworking skills and owning a second hand GMC cordless with only one battery

lets say a short time later



















ok i have a very old planer ,saw and angle grinder /sander and a few clamps
and hey voila new table ...
the prick of a thing about this is i now have to make some bench seats






BulldogPup
6657 posts
3 Sep 2012 4:24PM
Thumbs Up

sweet waste not .....

62mac
WA, 24860 posts
3 Sep 2012 4:28PM
Thumbs Up

Great looking table mate,well done

FFS,I get red for this comment,looks like our friend is back and doggie too

Tassiedevel
TAS, 2249 posts
3 Sep 2012 6:42PM
Thumbs Up

thought you said you had no skills there someshere Prawnhead

looks great with the polished wood floor

SP
10979 posts
3 Sep 2012 5:26PM
Thumbs Up

Tassiedevel said...

thought you said you had no skills there someshere Prawnhead

looks great with the polished wood floor


+1 good job Prawnhead.

Looks like the thumbs are back Mac

62mac
WA, 24860 posts
3 Sep 2012 5:28PM
Thumbs Up

Yes SP he is back

Ted the Kiwi
NSW, 14256 posts
3 Sep 2012 7:35PM
Thumbs Up

Nice work but I must say I was a little disappointed by the end result.....after the first few pictures and the gluing I was thinking that we had a wooden board being made

Top job - you are one skilled operator!

Prawnhead
NSW, 1317 posts
4 Sep 2012 10:15AM
Thumbs Up

Ted the Kiwi said...

Nice work but I must say I was a little disappointed by the end result.....after the first few pictures and the gluing I was thinking that we had a wooden board being made

Top job - you are one skilled operator!


thanks ted but lets say i am a little more skilled with the camera than the saw
its pretty rough around the edges i refer to it as "rustic "

the board is next i am just trying to source some(reasonably priced) pawlonia ,hopefully from a mate, anyone know/got a supplier

Tux
VIC, 3829 posts
5 Sep 2012 9:39AM
Thumbs Up

Prawnhead said...

Ted the Kiwi said...

Nice work but I must say I was a little disappointed by the end result.....after the first few pictures and the gluing I was thinking that we had a wooden board being made

Top job - you are one skilled operator!


thanks ted but lets say i am a little more skilled with the camera than the saw
its pretty rough around the edges i refer to it as "rustic "

the board is next i am just trying to source some(reasonably priced) pawlonia ,hopefully from a mate, anyone know/got a supplier



These guys are good might be a bit far for you unless they deliver www.paulowniatimber.com.au/timber.php

dotcomdotau
WA, 505 posts
5 Sep 2012 7:47AM
Thumbs Up

Prawnhead said...

Ted the Kiwi said...

Nice work but I must say I was a little disappointed by the end result.....after the first few pictures and the gluing I was thinking that we had a wooden board being made

Top job - you are one skilled operator!


thanks ted but lets say i am a little more skilled with the camera than the saw
its pretty rough around the edges i refer to it as "rustic "

the board is next i am just trying to source some(reasonably priced) pawlonia ,hopefully from a mate, anyone know/got a supplier


SWEEEET job there PH great to see an idea turn into something that looks great and can be used You should be well pleased mate
Next job - 901 LB

chrispychru
QLD, 7932 posts
5 Sep 2012 12:44PM
Thumbs Up

had a chicky walk by with some nice junk in the trunk



Subscribe
Reply

Forums > Surfing Longboarding


"unrelated shed junk" started by Prawnhead