Hi all
I accidentally had my memory card on "lock" so didn't record my session. I downloaded the Navilink and got most of the session, except for the last 1/2 hour ( I hadn't cleared the memory before the session) So I thought I'd save the data logger, which I did successfully, but when I open the file with realspeed, it does its little calculation in the bottom left corner but then displays this:
Any suggestions? Do I need a different version of realspeed to read the SBP file?
Any help greatly appreciated
Nat
you should be able to go to data logger on the GT11 and "save to card".
This will create a SBP file on your card which you can read with the later version of realspeed
Nat download the latest realspeed version 1.924.
1.922 and 1.923 had date probs when using data from the datalogger
Hi
Thanks for all the responses, I've been using realspeed 1.915 so that might be the problem, have just downloaded the latest version and am waiting for the registration code.
Hopefully it will work, even though I had the Navilink recording as well.
Nat
Thanks Decrepit
never even thought about trying the old registration code - that worked fine.
And the file comes up as well now - all good.
Thanks again to everybody.
Nat
That's great Nat, looks like you can run both systems concurrently.
I'm still interested to know how each affects the other.
There must be reduced storage time somewhere along the line.
I suppose it's too hard to work out the hrs in both the downloaded navilink files and the datalogger files??????
Or even just the size of the sbp file would be an indication.
My sbp files are around 850kb.