Forums > Kitesurfing Gear Reviews

Planform size of Zephyr

Reply
Created by bramber > 9 months ago, 19 Sep 2020
bramber
VIC, 135 posts
19 Sep 2020 7:32AM
Thumbs Up

Can someone tell me what is the largest rectangle shape (length X width in metres) on the ground required to unroll an unpumped ozone zephyr kite flat on the ground eg for setup purposes?

Ozone Kites Aus
NSW, 884 posts
Site Sponsor
19 Sep 2020 10:33AM
Thumbs Up

Select to expand quote
bramber said..
Can someone tell me what is the largest rectangle shape (length X width in metres) on the ground required to unroll an unpumped ozone zephyr kite flat on the ground eg for setup purposes?


You have to tell me why you need this? I'm so curious I went and unrolled by Zephyr you would need a spare 2.7m by 8.8m bit of floor space.

Puetz
NT, 2179 posts
20 Sep 2020 12:03PM
Thumbs Up

Select to expand quote
Ozone Kites Aus said..

bramber said..
Can someone tell me what is the largest rectangle shape (length X width in metres) on the ground required to unroll an unpumped ozone zephyr kite flat on the ground eg for setup purposes?



You have to tell me why you need this? I'm so curious I went and unrolled by Zephyr you would need a spare 2.7m by 8.8m bit of floor space.


... my guess, how much deck space on a boat needed to pump up kite!!!

bramber
VIC, 135 posts
20 Sep 2020 10:36PM
Thumbs Up

Select to expand quote
Ozone Kites Aus said..

bramber said..
Can someone tell me what is the largest rectangle shape (length X width in metres) on the ground required to unroll an unpumped ozone zephyr kite flat on the ground eg for setup purposes?



You have to tell me why you need this? I'm so curious I went and unrolled by Zephyr you would need a spare 2.7m by 8.8m bit of floor space.


Thanks for this! Basically theres a good kite spot I camp at but it doesn't have good ground (eg nice grass) for kite setup/packdown. So I want to know the maximum tarp size I would need to get for conceivably the largest kite size I might ever consider owning ;)

Ozone Kites Aus
NSW, 884 posts
Site Sponsor
21 Sep 2020 9:29AM
Thumbs Up

Select to expand quote
bramber said..

Ozone Kites Aus said..


bramber said..
Can someone tell me what is the largest rectangle shape (length X width in metres) on the ground required to unroll an unpumped ozone zephyr kite flat on the ground eg for setup purposes?




You have to tell me why you need this? I'm so curious I went and unrolled by Zephyr you would need a spare 2.7m by 8.8m bit of floor space.



Thanks for this! Basically theres a good kite spot I camp at but it doesn't have good ground (eg nice grass) for kite setup/packdown. So I want to know the maximum tarp size I would need to get for conceivably the largest kite size I might ever consider owning ;)


I had a sleepless night wondering about this question?

Leighbreeze
WA, 550 posts
21 Sep 2020 1:28PM
Thumbs Up

Unusual Question mate but very careful with your loved kiting gear.
I know where your coming from well done.

Gorgo
VIC, 4995 posts
28 Sep 2020 8:22AM
Thumbs Up

You can concertina fold a large wing in a narrow space. Paragliders have been doing it for decades. I tried it yesterday with my 12m kite and it worked very well.

I was surprised at how easy it was. I thought the leading edge would be too stiff and the air would get trapped in the folds. It's actually much easier than folding a paraglider, which I have done hundreds of times.

It's done so you can fold a big wing in a small space and not drag it across the ground. It's also meant to avoid damage to the leading edge battens on a paraglider, but that is not relevant to an LEI kite.

Basically you s-fold the leading edge to the middle leaving a gap of 2-3 panels. Repeat on the trailing edge, then roll over the s-folded panels to lock in the s-folds. Repeat on the other side. Fold the package as normal to put in the bag.



Subscribe
Reply

Forums > Kitesurfing Gear Reviews


"Planform size of Zephyr" started by bramber