hi all this is a realy silly question can some on give me some advice on how to set up my new de control bar iam using it on the hq beamer 3 5m and i have never flow with a bar before and iam not sure how to set it up
do the power lines go to the middle two and the brakes go to the out side of the bar ?
please help thanks in advance
n4zero,
I don't know the HQ beamer, but assuming north is north, and south is south technically yes your power lines should go to the centre. If you are using it on a bar, you are going to have to use a harness or the entire system won't work (being able to depower it, although looking on the net it doesnt look like a depower kite) so I don't really see the point of putting it on a bar.
I would call the shop or person you got it from and ask them for how to set it up.
i have a harness for this .so your saying it wont work with my kite ? what would be the best bar to get .
N4zero,
Hi again, I am not sure if the kite is designed for a bar, you are best checking with the manufacturer.
Generally speaking bars are reserved for depower kites, your kite appears to be a fixed bridal, which is best suited to handles.
Get in touch with HQ they will recommend the best set up amigo!
:)
You will need to look on thier website here- www.powerkites.de/index.php?option=com_kite&view=kite&Itemid=216 to see which bar you have. Then look at thier downloads page for the instructions.
If you want to use a harness with the basic bars you will need a fixed loop with quick release to go on the bar.
Regards,
Jason
Briskites
