Forums > Sailing General

Compass re furb?

Reply
Created by Roama > 9 months ago, 23 Sep 2014
Roama
TAS, 194 posts
23 Sep 2014 8:56PM
Thumbs Up

I have a Sesstral compass deeply in need of a bit of TLC





any Ideas who services / restores these?

HG02
VIC, 5814 posts
23 Sep 2014 9:16PM
Thumbs Up

Romona did tell me what oil to use cant remember right now . They know how to charge for thing like that. I wonder how hard it would be for you to refurbish it .Looks like it needs a good clean inside and new oil parkster. While your at it bead blast the pedestal and a two pack white and polish the brass

LooseChange
NSW, 2140 posts
24 Sep 2014 12:22AM
Thumbs Up

Mobil make a an oil ideally suited to compass damping duties, it is called Isopar L. If you can't find that product anywhere then refined purified kerosine is the next best thing, glycerine can also be used but the previous two are a better option. Don't use alcohol as it contains water and will surely damage your unit.

Ramona
NSW, 7490 posts
24 Sep 2014 9:00AM
Thumbs Up

It really depends on what is in it now. Some products don't mix well and it would be good to start with clean insides.

I use Propylene Glycol. It has to be clear and have the correct damping.

LooseChange
NSW, 2140 posts
24 Sep 2014 11:53AM
Thumbs Up

I would advise against Propylene Glycol as it is hygrscopic and absorbs water.

Regardless of what is in your compass at this time, it can be washed and flushed out and replaced with the liquid of your choice.

Whatever that liquid you choose, make sure it has been de-gassed, otherwise you will have a bubble again at the top of your bowl.

You can de-gas if you have access to a vacuum chamber or you can gently heat the liquid to drive out extraneous gasses. Once de-gassed do not agitate for fear of re-introducing gasses.

For obvious reasons if using a flammable substance like eg. kerosine, heat it outside and not in the house on the wifes cooktop.

andy59
QLD, 1153 posts
26 Sep 2014 1:02PM
Thumbs Up

I remember reading to check and see if the new fluid mixes with the old before re-filling because some fluids are alcohol based and some are oil based. But I have no actual experience.

cisco
QLD, 12321 posts
27 Sep 2014 12:14AM
Thumbs Up

Select to expand quote
LooseChange said..
I would advise against Propylene Glycol as it is hygrscopic and absorbs water.

Regardless of what is in your compass at this time, it can be washed and flushed out and replaced with the liquid of your choice.

Whatever that liquid you choose, make sure it has been de-gassed, otherwise you will have a bubble again at the top of your bowl.

You can de-gas if you have access to a vacuum chamber or you can gently heat the liquid to drive out extraneous gasses. Once de-gassed do not agitate for fear of re-introducing gasses.

For obvious reasons if using a flammable substance like eg. kerosine, heat it outside and not in the house on the wifes cooktop.


Liquid of your choice!!! Yer not askin' me to pour me rum into the compass are yer???

It lubricates me orright so i'm sure it will lubricate the Jewel in the Compass, but that kerosine, good in lanterns and stoves but that is about all. It's abrasive you know.

Good tip on the de-gas L.C.

HG02
VIC, 5814 posts
27 Sep 2014 12:21AM
Thumbs Up

That compass looks like it has Tassy apple cider in it or bundy rum
It looks like its been in the Yarra river here in Melbourne looks pristine enough for that

LooseChange
NSW, 2140 posts
27 Sep 2014 12:57AM
Thumbs Up

Select to expand quote
cisco said..


but that kerosine, good in lanterns and stoves but that is about all. It's abrasive you know.

Good tip on the de-gas L.C.


Yes, I know, but in this case we are not using it as a lubricant, merely as a damping fluid, a purpose it does very nicely.

cisco
QLD, 12321 posts
27 Sep 2014 2:15AM
Thumbs Up

Select to expand quote
LooseChange said..

cisco said..


but that kerosine, good in lanterns and stoves but that is about all. It's abrasive you know.

Good tip on the de-gas L.C.



Yes, I know, but in this case we are not using it as a lubricant, merely as a damping fluid, a purpose it does very nicely.


You don't think it will affect the compass card bearing, jewel or otherwise.

LooseChange
NSW, 2140 posts
27 Sep 2014 3:27AM
Thumbs Up

Select to expand quote
cisco said..


You don't think it will affect the compass card bearing, jewel or otherwise.


It can't be guaranteed entirely without knowing other variables in the compass's contruction eg. seal materials or if there are any painted bits that could react adversely, generally speaking kerosine is a fairly benign product.
The Mobil product that I referred to in my earlier post, "Isopar L" is a synthetic form of kerosine.

Roama
TAS, 194 posts
27 Sep 2014 6:59AM
Thumbs Up

Sounds like a job for someone who has done this before with success!

HG02
VIC, 5814 posts
27 Sep 2014 7:54AM
Thumbs Up

HG02
VIC, 5814 posts
27 Sep 2014 7:55AM
Thumbs Up

HG02
VIC, 5814 posts
27 Sep 2014 8:01AM
Thumbs Up

www.howardinstruments.com.au/
Howard instruments are a good company



Subscribe
Reply

Forums > Sailing General


"Compass re furb?" started by Roama