Forums > Sailing General

Dyneema life lines

Reply
Created by southace > 9 months ago, 24 Jul 2020
southace
SA, 4776 posts
24 Jul 2020 7:19PM
Thumbs Up

i an extremely happy now after replacing the existing S/S wire life lines with 4 mm dyneema. Could actualy go to 5mm. It's so nice walking on decks with this product rubbing apon ones legs.






cisco
QLD, 12337 posts
24 Jul 2020 8:55PM
Thumbs Up

Looks good and easy to do ie no swageing etc but I believe dyneema is not UV resistant to any great degree.

You might do a cost analysis between stainless wire and dyneema as to how often each needs to be replaced.

Certainly dyneema is easier on your legs when you need to lean on it hard.

southace
SA, 4776 posts
24 Jul 2020 9:38PM
Thumbs Up

Select to expand quote
cisco said..
Looks good and easy to do ie no swageing etc but I believe dyneema is not UV resistant to any great degree.

You might do a cost analysis between stainless wire and dyneema as to how often each needs to be replaced.

Certainly dyneema is easier on your legs when you need to lean on it hard.

10 years, best to do it in silver rather than black. Will be intruduced soon to most racing catogries.

All@Sea
TAS, 232 posts
25 Jul 2020 12:11AM
Thumbs Up

" Will be intruduced soon to most racing catogries."

I'll believe it when I see it, I won't be changing until I see it in writing...

slammin
QLD, 994 posts
25 Jul 2020 8:46AM
Thumbs Up

I replaced mine after 5 years, not from uv but a bit of rubbing from 1 eye in the staunchion. The uv resistance has proven much better than initially expected. Seeing more and more standing rigging professionally done in dyneema.

shaggybaxter
QLD, 2541 posts
25 Jul 2020 9:40AM
Thumbs Up

Even with stainless steel lifelines, a handy tip is the idea of lashing them to the pushpit with dyneema. If you need to get back on the boat in a hurry with an inflated pfd, it's much easier to cut a dyneema strop on the lower lifeline than try and jam your way underneath.

Madmouse
394 posts
25 Jul 2020 11:31AM
Thumbs Up

Dyneema type ropes claim excellent uv resistance. Anyone had any other experience?

2bish
TAS, 815 posts
25 Jul 2020 5:37PM
Thumbs Up

Select to expand quote
Madmouse said..
Dyneema type ropes claim excellent uv resistance. Anyone had any other experience?


SK75 is supposed to have high/superior UV resistance. I don't know how that's quantified though? My rigger used it on my backstay, so there must be some confidence in it.

southace
SA, 4776 posts
25 Jul 2020 6:30PM
Thumbs Up

Select to expand quote
2bish said..


Madmouse said..
Dyneema type ropes claim excellent uv resistance. Anyone had any other experience?




SK75 is supposed to have high/superior UV resistance. I don't know how that's quantified though? My rigger used it on my backstay, so there must be some confidence in it.



My backstay is dyneema silver possibly 10 years old. It depends on the quality apparently . The stuff we used was from Germany . Works out about $200 top and bottom rails not including labour for a 42 foot yacht. The bits and pieces for gates and attachments are a cost also the the correct Staunton posts which I have just replaced 10 with 12 new ones will help. Also the gate fittings by Bluewater seem very good quality and hides the splice.





tarquin1
950 posts
26 Jul 2020 2:44AM
Thumbs Up

If you are worried about UV just use line with the cover. I have seen plenty of boats with lifelines with cover. I may be wrong but some Dyneema has a UV protection applied and some doesn't.
Dyneema is also great for a second Jack line. Have a normal webbing jack line and a second dyneema one so people can pass each other when clipped on.

shane450
54 posts
26 Jul 2020 8:21AM
Thumbs Up

We have had dyneema lifelines on Defino for a year now dyneems has excellent uv stability , i inspect it every few months so far i m happy as it looks great and no stained fittings i used grey 5 mm sk 75



Subscribe
Reply

Forums > Sailing General


"Dyneema life lines" started by southace