Here is a couple of pictures of my Gooseneck has anyone had there's Replaced or repaired ? Or even resleaved
Not sure, but if it is an original FICO fitting, they have been taken over by Ronstan so maybe worth a call and possible they have something to replace it with
or try this lot in the US www.rigrite.com/Spars/SparParts/Gooseneck_slides.php
or Allyachts maybe be able to make/adapt something
www.allyachtspars.com.au/wp-content/uploads/2013/12/Allyacht-Spars-Catalogue.pdf
ALLYACHT SPARS AUSTRALIA 1853 Lytton Road, Lytton, QLD, 4178 Ph: +61 (07) 3893 2233 info@allyachtspars.com.au
This could be a possibility
www.rileyfittings.com/goosenecks/rm85
Does it need to be on the track? Might be simpler & stronger to flick the track and have a fixed one.
The SS slide is an easy repair. If the cast part is alloy then it's easy to replace the metal and re drill. I would be inclined to drill out the pivot joint and replace the cast metal section with SS. and weld a new thicker SS U section onto the slide if you intend to retain the slide set up.
Select to expand quoteJethrow said..
This could be a possibility
www.rileyfittings.com/goosenecks/rm85
Does it need to be on the track? Might be simpler & stronger to flick the track and have a fixed one.
Yeh the track does look the same
