Forums > Sailing General

advice on painting non skid areas on deck

Reply
Created by HG02 > 9 months ago, 22 Jun 2014
HG02
VIC, 5814 posts
22 Jun 2014 10:14AM
Thumbs Up



I would like to paint my deck non skid on the cabin roof in a contrasting color before I fit a solar panel, preference would be either roller or brush. eventually the rest of the non skid when the weather warms up
any advice taken on board



end up with this effect




cisco
QLD, 12337 posts
22 Jun 2014 10:47AM
Thumbs Up

Epigrip which is pulverized/powdered rubber added to the paint will give you a very nice non skid surface that will not tear your feet to shreds.

It can be applied with a spray gun but it will float in the paint so you need to keep it well mixed during the painting process.

Glass beads, sand and crumbled cork are OK if you never go bare foot on deck and will be scrubbing your decks every couple of days. They collect dirt like crazy.

Pekeri
VIC, 81 posts
22 Jun 2014 12:22PM
Thumbs Up

International Interdeck.

Features
Slip resistant
polyurethane deck paint.
Contains fine material additive for hard wearing,
non-slip surface.
Suitable for all substrates.
Low sheen finish prevents sunlight dazzle.
Apply straight from the can with brush or roller.

Application Details
Area: Above water
Finish/Sheen: Low sheen
Number of Coats: 1-2
Method of application: Brush / Roller
Thinner: Enamel Thinner #1

Painted my decks January 2014.

Before:





After::






After:


Used 2" stiff brush and "stippled" a lot.

Very Happy with results.


nswsailor
NSW, 1434 posts
22 Jun 2014 12:24PM
Thumbs Up

I used the Norglass system.

In fact I have to remove a section to allow for a halyard to run across a small part.

Proving to be really hard to remove

So I reckon I can recommend Norglass Weather Slip Resistant Deck Paint

blackswan
WA, 45 posts
22 Jun 2014 11:21AM
Thumbs Up

Jst did mine with Kiwigrip, paint it on thick then roll with a stipple roller. very pleased with results, just make sure you spend time on masking.

Interested to hear what you use and how it goes

HG02
VIC, 5814 posts
22 Jun 2014 5:18PM
Thumbs Up

Select to expand quote
blackswan said...
Jst did mine with Kiwigrip, paint it on thick then roll with a stipple roller. very pleased with results, just make sure you spend time on masking.

Interested to hear what you use and how it goes


Will do Black swan

brizzydave
406 posts
23 Jun 2014 12:38PM
Thumbs Up

Emerclad made by parchem.

Simply the best **** ever.

HG02
VIC, 5814 posts
23 Jun 2014 11:28PM
Thumbs Up

Select to expand quote
nswsailor said...
I used the Norglass system.

In fact I have to remove a section to allow for a halyard to run across a small part.

Proving to be really hard to remove

So I reckon I can recommend Norglass Weather Slip Resistant Deck Paint


The local chandler has Norglass so Ill drop by and get some

Sunseeker39
WA, 71 posts
23 Jun 2014 11:39PM
Thumbs Up

Tredgrip is fantastic.
I buy the white then take to the local paint shop to tint.
It works fine with standard paint tints.
$40 a litre or thereabouts.
use a very fluffy roller

Rattlehead
QLD, 555 posts
24 Jun 2014 10:18PM
Thumbs Up

+1for Kiwigrip







Subscribe
Reply

Forums > Sailing General


"advice on painting non skid areas on deck" started by HG02