porn for the big V

Select to expand quote

Dazzler75 said..
Hey Ron,

Great looking board.

Looks like the bottom has lot going on - what's the thought process? (not expecting all the trade secrets)

The concave looks to go back to almost mid point - would that make it harder / easier to get on the nose?

The concave on my 10ftr stops about 1.5 - 2ft from tip and this sweet spot once it gets going. 2/3 steps forward and it flies. I like the look of the pin - should make it easier to turn.

Daz

I have always loved and shaped concaves....I think the best concaves have come from this area for a very long time....going way back, when Glen Richie and Mitchell Rae were doing outer islands out of Nana Glen..... (Glen is now living in PNG building boats I think, and Mitchell is just down the road still doing outer island of course)....we definitely pushed the envelope in concaves...them a bit more than me....anyway.....what was found was that when a heavy concave was starting to max out with speed ,it wanted to sit flat and not roll up on its rail....almost sucking onto the face...Glen and Mitch started to chine the rail through the nose fading out round halfway to resin edges through the tail...I bowled the nose lifting the rail off the bottom....around the mid to late eighties I started to run the chine right through...which in simple terms made for a user friendly concave...I have had conversations with Mitch about this...and we both agree it must have been a natural evolution as neither one of us was influenced by each other, and both came up with a very similar concept.....short answer Daz is that if you love concaves, a little bevel on the rail works wonders....the angle....width and curves are the trade secrets

Select to expand quote

arkgee said..

Dazzler75 said..
Hey Ron,

Great looking board.

Looks like the bottom has lot going on - what's the thought process? (not expecting all the trade secrets)

The concave looks to go back to almost mid point - would that make it harder / easier to get on the nose?

The concave on my 10ftr stops about 1.5 - 2ft from tip and this sweet spot once it gets going. 2/3 steps forward and it flies. I like the look of the pin - should make it easier to turn.

Daz

I have always loved and shaped concaves....I think the best concaves have come from this area for a very long time....going way back, when Glen Richie and Mitchell Rae were doing outer islands out of Nana Glen..... (Glen is now living in PNG building boats I think, and Mitchell is just down the road still doing outer island of course)....we definitely pushed the envelope in concaves...them a bit more than me....anyway.....what was found was that when a heavy concave was starting to max out with speed ,it wanted to sit flat and not roll up on its rail....almost sucking onto the face...Glen and Mitch started to chine the rail through the nose fading out round halfway to resin edges through the tail...I bowled the nose lifting the rail off the bottom....around the mid to late eighties I started to run the chine right through...which in simple terms made for a user friendly concave...I have had conversations with Mitch about this...and we both agree it must have been a natural evolution as neither one of us was influenced by each other, and both came up with a very similar concept.....short answer Daz is that if you love concaves, a little bevel on the rail works wonders....the angle....width and curves are the trade secrets

glad you explained that. I was kinda worried it would catch on the chines up front

Photo does not do justice. Have not tried it yet, have damaged rib, very frustrating.


Don't know how get the ocean from running off the page

Picked it up, christened it in far less than ideal conditions but can feel it just wants to go. Hopefully with LFish tomorrow we'll get a few nice ones.

Select to expand quote

vanders1 said..
Picked it up, christened it in far less than ideal conditions but can feel it just wants to go. Hopefully with LFish tomorrow we'll get a few nice ones.

SSSSsssssmmmmmoking V

Select to expand quote

thePup said..
mmmmmm nice Flighty .... and welcome to the house - beer's in the fridge beside you there help yerself

Nice touch pup

Tiller or Tilley? was it the blue and white board?

Select to expand quote

something a little different for you Bruno....hope the drugs have kicked in



Flight said..
Photo does not do justice. Have not tried it yet, have damaged rib, very frustrating.


Don't know how get the ocean from running off the page

HTF do you do that ARKGEE?????

Thats is scarier that Back to the Future Hoverboards.

ET.

Select to expand quote

E T said..
HTF do you do that ARKGEE?????

Thats is scarier that Back to the Future Hoverboards.

ET.

cool but eh?

Select to expand quote

E T said..
HTF do you do that ARKGEE?????

Thats is scarier that Back to the Future Hoverboards.

ET.

You have to order one to understand the magic ET, your life will never be the same.

Select to expand quote

thePup said..

arkgee said..

something a little different for you Bruno....hope the drugs have kicked in



Flight said..
Photo does not do justice. Have not tried it yet, have damaged rib, very frustrating.


Don't know how get the ocean from running off the page

mmmmmmmmmmm I could live there easily

I don't know how he does it either but, Ron, I can say that board was a delight today. Late dusk at Tea Tree, few people, lovely waves, warm water and it just cracks along. Drugs kicked in so all was good. Big smile on my dial.

Awesome champion - and I think the Houndrel is impressed looking at that big grin

Beautiful looking stick Vanders. Make sure you bring her over lovely work there RG. Looks insane.

RG - I have a MR corral reefer as my gun. It's insane. That man makes a lovely board like yourself. The quality of the finish is worth its weight in gold. The board goes incredible. It never lets me down giving me a world of confidence when I should be shutting bricks ! I love the way he did the stringers - touch of class.