Got a pm offering me the biku elusive development or b.e.d thruster set to try on my new cw longboard.pretty excited about that
Got a pm offering me the biku elusive development or b.e.d thruster set to try on my new cw longboard.pretty excited about that
With matching side tables
Got a pm offering me the biku elusive development or b.e.d thruster set to try on my new cw longboard.pretty excited about that
With matching side tables
I pigged out on too many waves yesterday...my new fins will.have to wait till this Friday now
tell me about it you gotta share the love around chrispy
I pigged out on too many waves yesterday...my new fins will.have to wait till this Friday now
tell me about it you gotta share the love around chrispy
...... pffffffftttttt shoulda dropped in Godfather ya shaggin' too many of your groupies and ya lost ya zing champion
Bought the funk this arvo
Put it in and it's loose
I remember someone saying they did something to fix the problem...please help
Here is a phone pic
That has only happened to me once and really gave me the ****s some OS made fin I reacall easy fix is ask SDR for the plastic stripe which fits between the box and fin I know mct have some if you get stuck.they will post it if in stock.
That has only happened to me once and really gave me the ****s some OS made fin I reacall easy fix is ask SDR for the plastic stripe which fits between the box and fin I know mct have some if you get stuck.they will post it if in stock.
Thanks for that...yeh not the happiest as I was busting to use it tomorrow.....can't complain considering how well the big girl went as a 2+1... I have even understood the pleasure of trimming on this board
Mine hardly ever fit. I used to Put a match under it. But don't have matches anymore..
So the bit inside a biro that holds the ink, just cut an inch of the end where there isn't any ink.
Unscre the fin put it under then do it up as normal.
Really you can use anything, I often just grab a stick from the gutter and brake it up and use that.
If it moves sideways, you can put some tape on the side.
And I'm really impressed you uploaded a photo 2
And if you have one that is tight, wax the sides of the base before you slide it in, for unknown reasons this works.
Thanks even more people
Will worry about it tomorrow.. 2+1 will.do just fine until then....or the chrispy chip might get a skate
I was going to suggest that you move forward in the box as you do have it a long way back and this would solve the problem
I use some thin clear rubber type material that one of the boys at beach uses to make dentures. Works a treat.
Oh or grab a small bit of Gladwrap and stuff it in along the slot before ya slip the fin in
Everyone knows that wrapping it in glad wrap before you stick it in only works when you on holiday and will never see the other person again....
Ive had this on one of my boards. Either cut a strip off a coke can and wrap it around the base or get a straw from KFC or McDonalds, cut it in half and put it on the base of your fin and Roberts your uncle.
Bought the funk this arvo
Put it in and it's loose
I remember someone saying they did something to fix the problem...please help
Here is a phone pic
ps. what boards is this chrispy. I dont think I have seen a pic of this one...
Oh or grab a small bit of Gladwrap and stuff it in along the slot before ya slip the fin in
Everyone knows that wrapping it in glad wrap before you stick it in only works when you on holiday and will never see the other person again....
hahaha sadly it is futile if you encounter a Wizard's sleeve
tilers wedge does the trick too.
really fin box and fin set ups- all the company's have managed to screw it up. futures and starboard being the biggest sinners. sick of packing , wedging, taping , sanding sides and toes off to get fins to fit. that 'slater trout' fin is the worse fitting fin ever. its 8.5" and the slot section just disappears down every fin box- to skinny, toe is wrong, pin position is wrong
and im sorry to say shapers are guilty too. shapers fins fitting real loose in shapers fin boxes - doh- how!!!!
can we delete todays surf conditions
No because its a good one not to be repeated,so will it be on tomorrow Mr surf reporter?
I took your advice and worked today wife's turn tomorrow
Meh,sadly I think it will be crap everywhere
We had less than 10 n,nw,nnw blowing all night night....we got bumpy lumpy rubbish...
But I'm trying reverse psycology on Huey now