Forums > Windsurfing General

How do they

Reply
Created by nerdycross > 9 months ago, 29 Jul 2020
nerdycross
296 posts
29 Jul 2020 2:10PM
Thumbs Up

I'm sure this has been asked before but how do the windsurfing board company's work out the volume of their boards ?

mr love
VIC, 2340 posts
29 Jul 2020 4:20PM
Thumbs Up

They ask their computer.... "computer says 130.5 liters"





John340
QLD, 3094 posts
29 Jul 2020 7:06PM
Thumbs Up

In Starboard's case, very badly. For many seasons, their 97 model was actually closer to 105 litres

kato
VIC, 3376 posts
29 Jul 2020 7:13PM
Thumbs Up

Select to expand quote
John340 said..
In Starboard's case, very badly. For many seasons, their 97 model was actually closer to 105 litres


But John it sailed like a 97......

Madge
NSW, 471 posts
29 Jul 2020 8:26PM
Thumbs Up

Theres a lot of company's out there that state a lot lower than they actually are. Then when you get on them and sail them, they seem that little bit easier than you were expecting and hold a little larger sail than you were expecting too.

Some seem a lot floatier than they are due to width which displaces the water more and width gives stability too so seem a lot bigger.

decrepit
WA, 12005 posts
29 Jul 2020 7:24PM
Thumbs Up

volume is only really relevant for stationary flotation. It's not a good measure of any other function. Width is a much better way to determine sailing characteristics.
I determine volume by weighing the foams during construction. First checking that densities are as claimed, seems to work out within a few litres.

mr love
VIC, 2340 posts
30 Jul 2020 9:24AM
Thumbs Up

Madge, Decrepit is spot on. Diplacement is directly related to volume not width and is really only relevant when you are off the plane. Volume distribution is also important, placing the volume where you stand and not in the nose has a big impact on the "perceived" volume of the board. An "S" shaped board will feel floatier than a board with a more contant volume distribution ( until you stand too far forward)

Back to the original question, I think you will find most if not all 'Brands" ( as opposed to custom builders) use CAD and will know exactly what the volume of the board is. Whether they chose to state the volume correctly is another subject.

Bristol
ACT, 343 posts
31 Jul 2020 9:46AM
Thumbs Up

If they (or you) need to know the real volume to the last millilitre, they could use Archimedes' principle. That is, put the board in a body of water, and add weights to the board until it stops floating. The volume in litres is equivalent to the total of the weights in kilograms.

Eureka!

Mark _australia
WA, 22247 posts
31 Jul 2020 12:44PM
Thumbs Up

^^ minus the weight of the board itself :)

I agree they tend to understate, as everyone likes an early-planer...



Subscribe
Reply

Forums > Windsurfing General


"How do they" started by nerdycross