Send Message
Weather | Buy&Sell | Forums |  |
Weather | Buy & Sell | Gallery | Forums | |
Good morning,
I have a JP Australia X-Cite FWS 2007 that needs a little bit of cosmetic work, mainly on the nose as the paint is chipped, few other spots with some little bubbles that could be sanded and painted back, nothing major but would just like to make it pretty again!
What kind of paint would you recommend for that kind of touch up job (the idea is not to strip off all the old paint, being white, it makes the touch up easy)
Thanks!
Good question and what can you fill / undercoat the patches with so thay the finsihed coat is all the same level and smooth ?
I also have a white board that has had some serious nose damage ..no longer ..
the best paint I found was ...WATTYLE ...RUSTKILL ..gloss white ..it fades back after a few days ..but almost un noticeable
Why is it good ..it has a built in primer and is very tough.spray can ...no clean up .
2x light coats ..
I usually use a small can of auto touch up paint. You can get a wide range of different shades and it dries fast & hard. Use spray putty if you have a big repair.
