I used gps speed reader to trim out the car ride home (
) , but it insists on creating an sbp file that KA72 interprets as from year 2002. Is there something in setup to get it to set the right date? Or is there something else upsetting KA72?
This is bad because uploading the sbp to KA72 and then transferring to GPSTC results in "you can't edit this session"
Cheers
A cockroach would make a comment about "21 years in the past, that would be about right for a Queenslander." you can respond politly by pionting to the scoreboard.
I would ask if you got the right dates set up in your units? I just had a camera reset all it's dates with some dead beatteries.
Well sbp_fix brought me up to 2022, but we are still a year adrift.
This file started out as a download from the GT31 datalogger as I had taken the card out before turning the GT31 off (yes, it was a comedy of errors - normally I operate the machine properly). I wonder if this is why I am seeing this issue for the first time?
Select to expand quoteShifu said..
Well sbp_fix brought me up to 2022, but we are still a year adrift.
This file started out as a download from the GT31 datalogger as I had taken the card out before turning the GT31 off (yes, it was a comedy of errors - normally I operate the machine properly). I wonder if this is why I am seeing this issue for the first time?
sbp-fix is that the python sketch that I wrote for adjust the date from sbp files (github.com/RP6conrad/GT11_gps_week_rollover)? I could adjust the correction of the date with 1 year. Is it exact 1 year, or how many days ?
Greetings, Jan.
Thanks. It will have to wait until I can get back to my home computer. No python installed on this work machine.
Ok, it looks like this situation only applies to my GT31 when I pull data off the data logger. My last two sessions were saved to card and have uploaded to KA72 with the correct dates.
