Gday everyone,
One of the guys today had his GPS set to Data Logger...Log Switch... OFF. This meant there was no file on his card. I did "save to card" but just gave a couple of small files.
Is there any way to retrieve the info from the session apart from the tripmeter log? I am trying to do a 1 hr calculation.
Needless to say I fixed the setting to "ON" but would be good to get any data out.
Here is the SG_TRP.SPD extract.
Thanks
James
*** HISTORY SPEED LIST ***
USER:xxxxx,SNO:133200912
---MAX SPEEDS---
[ 1] 31.56 KTS
[ 2] 27.52 KTS
[ 3] 27.13 KTS
[ 4] 26.12 KTS
[ 5] 25.48 KTS
[ 6] 25.19 KTS
[ 7] 25.03 KTS
[ 8] 24.58 KTS
[ 9] 24.51 KTS
[10] 24.20 KTS
[11] 23.63 KTS
[12] 23.55 KTS
[13] 23.40 KTS
[14] 23.38 KTS
---MAX AVG SPEEDS---
[ 1] 30.80-10S KTS
[ 2] 27.13-10S KTS
[ 3] 26.68-10S KTS
[ 4] 25.46-10S KTS
[ 5] 25.01-10S KTS
[ 6] 24.72-10S KTS
[ 7] 24.29-10S KTS
[ 8] 23.94-10S KTS
[ 9] 23.92-10S KTS
[10] 23.81-10S KTS
---TRIP METER---
TRIP ODOMETER??=22.12 NM
TRIP TIME??=5:26:18
STOP WATCH??=5:26:18.00
TRIP AVG SPEED??=4.06 KTS
TRIP MAX SPEED??=31.56 KTS
THRESHOLD SPEED??=0 KTS
Sorry if neither the card or the data logger was recording, I think that's it.
Which begs the question, why wasn't the card recording?
Was that also off? If so you'd better fix that as well, think it should be either "on" or "on fix" and recording "1sec sbin"
Thanks for the ideas guys. the small files were from after I turned on LOG SWITCH.
Decrepit, are there two places where you have to turn LOG SWITCH = ON? I just changed it in Data Logger menu.
Cheers
James