Front handle for wings

That looks like the 'Slick Pick' handle made by Clemens in Germany. I've ordered a couple of these handles from him and they work ok. They are made from a flexible TPU filament.
I've made some of my own using more rigid (nylon) filament and I think they work a bit better than the flexible Slick Pick.
PM me if you want Clemen's contact details.

I can, but I've designed my handle to suit the 2022 Slick SLS, while the Slick Pick fits 2023 Slicks (and Unit) onwards. The 2023 front straps are much shorter than the 2022 ones.
Once I've dialed in my 2023 rigid handle design, then I can share the STL. Probably a month or two away.

Select to expand quote

Wetscotty said..
Has anyone come across this little handle stiffener I spotted in an Insta post a while back? Could be a nice addition to improve the control while flagging.

If you get a model and need someone to print it, I can do that for you. Just cost you shipping from NZ to Aus

Select to expand quote

MrFish said..

Nikita said..
I can, but I've designed my handle to suit the 2022 Slick SLS, while the Slick Pick fits 2023 Slicks (and Unit) onwards. The 2023 front straps are much shorter than the 2022 ones.
Once I've dialed in my 2023 rigid handle design, then I can share the STL. Probably a month or two away.

Could I get a copy of the SLS stl or step file please ?

Yes, I've sent you a PM.
Here's what it looks like:

It's one piece. No sewing required. You just pop it on when the wing is deflated, and once inflated, it gets 'locked' into place by the inflated shape. I've added a couple of pieces of gorilla tape over the neoprene at the tips to make sure that it doesn't get damaged. You can see the clear tape in the photo.
My handle design is open on the outside because your hand doesn't actually touch the open side, so it feels great in the hand when the wing is flagging. It also allows for easy drying with the handle still installed. I don't remove the handle when packing up.