Forums > Kitesurfing General

Another Stupid North kite design

Reply
Created by Triggerhappy > 9 months ago, 24 Mar 2012
adrenal
VIC, 134 posts
28 Mar 2012 2:43PM
Thumbs Up

eppo said...

Again agreed! Pumped up the Ozone kites for the demo with the big ass valve and sooo easy. My 11m takes at least 100 pumps - I count to reduce the pain.

The dump valve is so you can roll it up from one side to the other, but so what! Yehs you have to inch along the leading edge to get to it. Just weird.

Hey when I dumped the air on the ozone it came out real fast man - is that bad for the kite??




Only bad for eardrum if it's too close - seriously!
Dump valve at wing tip makes it harder to expel all air since longer path to exit while rolling it up. Iv'e started using the pump in suck mode before rolling.

BTW: Not sure if u realise that due to battens at trailing edge, need to roll Rebels so that the trailing edge stays in a straight line. This is so the battens do not bend when you do the final 3 fold pack at the end.

GreenPat
QLD, 4083 posts
28 Mar 2012 2:07PM
Thumbs Up

getfunky said...

Yep - had a 2011 Cat 10m for a while. Was good kite but not my cuppa.

On 1st set-up with the Cat I was alarmed at how meagre the connection points were. No dramas in the end (no pun intended) tho.

The Ozone connections are massive compared to the North lugs (only a tiny fraction bigger than normal section of connection line. The issue is compounded by the North lines (from bar) having really robust thick sheathing. This makes them pretty stiff and likely to leave 'wriggle room' when connecting.

As I have said before - Rebel was a great kite and best I have tried for some time but the bad knot design is a real head scratcher.

I wouldn't let it put me off buying the kite, but I would be replacing the connection points before using for sure.


That was a North I launched for you the other day wasn't it? Too bad we'll never know if the loop slipped off the knot or you forgot to attach the line in the first place.

eppo
WA, 9515 posts
28 Mar 2012 12:42PM
Thumbs Up

Select to expand quote
adrenal said...

eppo said...

Again agreed! Pumped up the Ozone kites for the demo with the big ass valve and sooo easy. My 11m takes at least 100 pumps - I count to reduce the pain.

The dump valve is so you can roll it up from one side to the other, but so what! Yehs you have to inch along the leading edge to get to it. Just weird.

Hey when I dumped the air on the ozone it came out real fast man - is that bad for the kite??





Only bad for eardrum if it's too close - seriously!
Dump valve at wing tip makes it harder to expel all air since longer path to exit while rolling it up. Iv'e started using the pump in suck mode before rolling.

BTW: Not sure if u realise that due to battens at trailing edge, need to roll Rebels so that the trailing edge stays in a straight line. This is so the battens do not bend when you do the final 3 fold pack at the end.







Yep forgot to mention that. Actually I roll all the way until the last strut, then roll back the other way, tuck under and fold in two, only way I could get the battens to stop sticking out - which can cause damage.



Subscribe
Reply

Forums > Kitesurfing General


"Another Stupid North kite design" started by Triggerhappy