How do you remove water out of your board also?
I have gotten cracks in the front of my board but managed to suck the water out of it.
How can i be sure that there is no water?
Thanks
What's the story with this one?
I don't think I have ever snapped both arms at the same time.
Is it full carbon as well?
What's the story with this one?
I don't think I have ever snapped both arms at the same time.
Is it full carbon as well?
A 34 knot crash with me hanging on. At least the front of the board was in good shape. :)
Don't worry; if it's a normal board, as soon as you buy it the wind will stop blowing for a couple of months.
1. Tighten vent screw before use
2. Set foot straps, everything middle and go from there
3. Fin in the middle
4. Loop it
You want strap screws to be quite tight.
Look at my anti twist tip video a must do to prevent straps from twisting except maybe some starboard boards.
1. Tighten vent screw before use
2. Set foot straps, everything middle and go from there
3. Fin in the middle
4. Loop it
You want strap screws to be quite tight.
Look at my anti twist tip video a must do to prevent straps from twisting except maybe some starboard boards.
Thanks a lot!
My footstraps haven't slipped for a while and never rly have.
Last thing,
Prob should be a diff discussion and forum completetly (foiling)
But should i (would it be recommended) to leave the foil rigged? i use it around 3 times a week,
I have carbon wings ally fuselarge and carbon mast.
Thanks alot-Roy
Last thing,
Prob should be a diff discussion and forum completetly (foiling)
But should i (would it be recommended) to leave the foil rigged? i use it around 3 times a week,
I have carbon wings ally fuselarge and carbon mast.
Thanks alot-Roy
I keep the fuse and wings assembled. I use Tefgel on the bolts and crack each bolt once a month.
Last thing,
Prob should be a diff discussion and forum completetly (foiling)
But should i (would it be recommended) to leave the foil rigged? i use it around 3 times a week,
I have carbon wings ally fuselarge and carbon mast.
Thanks alot-Roy
I keep the fuse and wings assembled. I use Tefgel on the bolts and crack each bolt once a month.
Seconded
Last thing,
Prob should be a diff discussion and forum completetly (foiling)
But should i (would it be recommended) to leave the foil rigged? i use it around 3 times a week,
I have carbon wings ally fuselarge and carbon mast.
Thanks alot-Roy
I keep the fuse and wings assembled. I use Tefgel on the bolts and crack each bolt once a month.
Do you have an ally fuselarge with carbon eveything else?
Thanks i will start putting tefgel down.
Last thing,
Prob should be a diff discussion and forum completetly (foiling)
But should i (would it be recommended) to leave the foil rigged? i use it around 3 times a week,
I have carbon wings ally fuselarge and carbon mast.
Thanks alot-Roy
I keep the fuse and wings assembled. I use Tefgel on the bolts and crack each bolt once a month.
Do you have an ally fuselarge with carbon eveything else?
Thanks i will start putting tefgel down.
I've done it with Starboard, Slingshot, and Phantasm.
All have Aluminum fuses with composite wings.
Last thing,
Prob should be a diff discussion and forum completetly (foiling)
But should i (would it be recommended) to leave the foil rigged? i use it around 3 times a week,
I have carbon wings ally fuselarge and carbon mast.
Thanks alot-Roy
I keep the fuse and wings assembled. I use Tefgel on the bolts and crack each bolt once a month.
Do you have an ally fuselarge with carbon eveything else?
Thanks i will start putting tefgel down.
Aluminium mast and fuse and composite wings.