Thanks for the video!
Hows the wind range? Can you compare it to one of the old ART wings?
Still thinking about which size to choose.
I've only had one session on it but I really think the range is comparable to the V1 Arts. The 939 sits in-between the 899 and 999 V1 and feels exactly like that. I would have felt much more over-foiled on the V1 999 in these conditions, and the 899 would have likely been a little faster. The 939 improves the low end on the 899 definitely increasing the range. I got the 939 because I was looking to improve the range of the 899 and also feel OK jumping it. I don't jump my V1 999, so I felt that replacing it with a 999 V2 would have been unnecessary given I REALLY love my V1 999 and it does everything I want it to do... except breach tips well.In general, I don't jump foils wider than 900mm, but the 939 is close enough. I'm not the biggest fan of the shape of the V2. I feel they are too pointy. I would have loved to see a shape more akin to the ART Pros, but with more chord... but ignoring the pointy shape, it really is a good foil.
Here's another video from yesterday at a different angle... from our local drone pilot Steve Ross. A little bit of racing starts at about 00:40. I'm on the blue Unit 5.5 and the black Appletree.This is the V2 939 with a Skinny 362. I discovered that at speed that 362 generates too much lift for this setup. I need a smaller one. In the meantime, I move the mast back all the way on that board AND I shimmed the tail 0.5 a degree and it improved things. This angle doesn't look very fast. Flying lower helps with that.
?si=aDtGFffVsj_RuoB4&t=41
Had my first go on the 999 v2 yesterday.
80 kg rider, 45 skinny stab, ultrashort advance fuse and 90cm HM mast. Conditions were small wind chop and 16 knots wind.
The markering from Axis is pretty spot on. Glide and speed feels similar to 999 v1. Roll axis is looser and turning is quite similar to spitfire(lots of fun). It also handles rough water really well and I could keep a higher speed through chop than with the V1. Just a really fun and comfortable foil. It will be my go-to for most days.
How does the ARTv2 compare to spitfire for turbulent water?
I have all the v1 Arts and went off them for winging and went back to HPS as my normal spot is quite turbulent (river channel leading out to waves). Thought I'm maybe due for a new wing. But if managing 'wobbly water' is a priority, is the ARTv2 best option (prob 939)....or wait for a used spitfire?
This foil makes all the others irrelevant. It turns like the spitfire and glides like the ART series. Its the first foil I've ridden that makes me feel like I can surf on a wave. The turns are a bit more drawn out compared to the spitfire but I like that. I will be selling all my SF foils to get these for sure.
Select to expand quotestevet73 said..
How does the ARTv2 compare to spitfire for turbulent water?
I have all the v1 Arts and went off them for winging and went back to HPS as my normal spot is quite turbulent (river channel leading out to waves). Thought I'm maybe due for a new wing. But if managing 'wobbly water' is a priority, is the ARTv2 best option (prob 939)....or wait for a used spitfire?
Havent tried it back to back in the exact same conditions, but it feels about as forgiving as the spitfire in turbulent waters. It's a lot easier than art v1 in turbulence. I can imagine it comes down to more lift in the center and less lift in the tips.
I don't really see the use for the spitfire anymore as it just feels like an art v2 with less glide. I still like the higher speed of the art pro though.
Select to expand quoteBennis123 said..stevet73 said..
How does the ARTv2 compare to spitfire for turbulent water?
I have all the v1 Arts and went off them for winging and went back to HPS as my normal spot is quite turbulent (river channel leading out to waves). Thought I'm maybe due for a new wing. But if managing 'wobbly water' is a priority, is the ARTv2 best option (prob 939)....or wait for a used spitfire?
Havent tried it back to back in the exact same conditions, but it feels about as forgiving as the spitfire in turbulent waters. It's a lot easier than art v1 in turbulence. I can imagine it comes down to more lift in the center and less lift in the tips.
I don't really see the use for the spitfire anymore as it just feels like an art v2 with less glide. I still like the higher speed of the art pro though.
Thanks Bennis123. Probably just what I needed to hear before pulling the trigger. Seems like 939 is the safest bet.....
At this point I feel the V2 939 is the "better" size simply because it does sit between the V1 899 and 999. I don't think it's mean to replace either. However, it can potentially replace the 899, but it lacks the low end of the 999. This Sunday, I had to ditch the V2 939 for the trusty V1 999 when the wind softened because it was getting to be way too hard to get the 939 going.
Check out some video overviews of the ART V2 at foilers-community.com/2024-axis-art-v2-hydrofoil-wing/
So far, I have developed over 300 pages of info/reviews of foiling products for the foiling community. I absolutely froth foiling and I will continue to update/maintain as new products and reviews come out.
The ART V2 page has been one of the most popular pages so far.
PM me if you want any more info on the grand vision. : )
Select to expand quotecornwallis said..
I think there are more sitting on the fence than usual for the v2 after all the varying not-quites
I considered the LX as I don't particularly like the axis feel and supposedly the v2 predictably is definitely of the spitfire/art line.
I ended up ordering a proto Maguire which is axis compatible, will report back on how it goes, but I definitely am glad that smaller brands are making axis compatible foils
Here is the review of the Maguire that arrived along with a minor comparison of the v2 (prone/downwind so perhaps not relevant to the thread)
forum.progressionproject.com/t/maguire-foils-review/6469
Just had my first session on the 939 v2 and I am really happy!
I couldnt get the old ART899 to work in chaotic choppy water, it was just too much work.
I had the BSC810 for these conditions, which is a nice foil, but it just lacked glide.The 939 is really nice to handle in these conditions, plus a lot of glide and stability while still being agile.Would recommend!
Select to expand quoteFoilWays said..
I've only had one session on it but I really think the range is comparable to the V1 Arts. The 939 sits in-between the 899 and 999 V1 and feels exactly like that. I would have felt much more over-foiled on the V1 999 in these conditions, and the 899 would have likely been a little faster. The 939 improves the low end on the 899 definitely increasing the range. I got the 939 because I was looking to improve the range of the 899 and also feel OK jumping it. I don't jump my V1 999, so I felt that replacing it with a 999 V2 would have been unnecessary given I REALLY love my V1 999 and it does everything I want it to do... except breach tips well.In general, I don't jump foils wider than 900mm, but the 939 is close enough. I'm not the biggest fan of the shape of the V2. I feel they are too pointy. I would have loved to see a shape more akin to the ART Pros, but with more chord... but ignoring the pointy shape, it really is a good foil.
i have been mostly riding HPS 930/1050 and occasionally ART999. I use Ultra Short Black Fuse (not Advanced) /375P stab.
I weigh 75 kg's, proficient at jibing and now tacking from toe side.
Not into jumping / freestyle but riding swell and waves.
I am considering going to ART V2 939 so any perspective on proper fuse and stab choice appreciated.
Select to expand quotejrc22ski said..FoilWays said..
I've only had one session on it but I really think the range is comparable to the V1 Arts. The 939 sits in-between the 899 and 999 V1 and feels exactly like that. I would have felt much more over-foiled on the V1 999 in these conditions, and the 899 would have likely been a little faster. The 939 improves the low end on the 899 definitely increasing the range. I got the 939 because I was looking to improve the range of the 899 and also feel OK jumping it. I don't jump my V1 999, so I felt that replacing it with a 999 V2 would have been unnecessary given I REALLY love my V1 999 and it does everything I want it to do... except breach tips well.In general, I don't jump foils wider than 900mm, but the 939 is close enough. I'm not the biggest fan of the shape of the V2. I feel they are too pointy. I would have loved to see a shape more akin to the ART Pros, but with more chord... but ignoring the pointy shape, it really is a good foil.
i have been mostly riding HPS 930/1050 and occasionally ART999. I use Ultra Short Black Fuse (not Advanced) /375P stab.
I weigh 75 kg's, proficient at jibing and now tacking from toe side.
Not into jumping / freestyle but riding swell and waves.
I am considering going to ART V2 939 so any perspective on proper fuse and stab choice appreciated.
I have had 2 sessions so far with the 939 and an adv plus ultrashort fuse, skinny 45 stab in challenging very gusty conditions and found this setup very well balanced. I am 70kg and have been using the HPS 930 with the regular short fuse as my main foil up until now. While the 939 on the adv plus is a fair bit looser it didn't take long to get use to it, the only part that I found a bit trickier is foot swap.
Select to expand quotepanpanace said..jrc22ski said..FoilWays said..
I've only had one session on it but I really think the range is comparable to the V1 Arts. The 939 sits in-between the 899 and 999 V1 and feels exactly like that. I would have felt much more over-foiled on the V1 999 in these conditions, and the 899 would have likely been a little faster. The 939 improves the low end on the 899 definitely increasing the range. I got the 939 because I was looking to improve the range of the 899 and also feel OK jumping it. I don't jump my V1 999, so I felt that replacing it with a 999 V2 would have been unnecessary given I REALLY love my V1 999 and it does everything I want it to do... except breach tips well.In general, I don't jump foils wider than 900mm, but the 939 is close enough. I'm not the biggest fan of the shape of the V2. I feel they are too pointy. I would have loved to see a shape more akin to the ART Pros, but with more chord... but ignoring the pointy shape, it really is a good foil.
i have been mostly riding HPS 930/1050 and occasionally ART999. I use Ultra Short Black Fuse (not Advanced) /375P stab.
I weigh 75 kg's, proficient at jibing and now tacking from toe side.
Not into jumping / freestyle but riding swell and waves.
I am considering going to ART V2 939 so any perspective on proper fuse and stab choice appreciated.
I have had 2 sessions so far with the 939 and an adv plus ultrashort fuse, skinny 45 stab in challenging very gusty conditions and found this setup very well balanced. I am 70kg and have been using the HPS 930 with the regular short fuse as my main foil up until now. While the 939 on the adv plus is a fair bit looser it didn't take long to get use to it, the only part that I found a bit trickier is foot swap.
What speed do you get on the V2 939?
Select to expand quotewarwickl said..panpanace said..jrc22ski said..FoilWays said..
I've only had one session on it but I really think the range is comparable to the V1 Arts. The 939 sits in-between the 899 and 999 V1 and feels exactly like that. I would have felt much more over-foiled on the V1 999 in these conditions, and the 899 would have likely been a little faster. The 939 improves the low end on the 899 definitely increasing the range. I got the 939 because I was looking to improve the range of the 899 and also feel OK jumping it. I don't jump my V1 999, so I felt that replacing it with a 999 V2 would have been unnecessary given I REALLY love my V1 999 and it does everything I want it to do... except breach tips well.In general, I don't jump foils wider than 900mm, but the 939 is close enough. I'm not the biggest fan of the shape of the V2. I feel they are too pointy. I would have loved to see a shape more akin to the ART Pros, but with more chord... but ignoring the pointy shape, it really is a good foil.
i have been mostly riding HPS 930/1050 and occasionally ART999. I use Ultra Short Black Fuse (not Advanced) /375P stab.
I weigh 75 kg's, proficient at jibing and now tacking from toe side.
Not into jumping / freestyle but riding swell and waves.
I am considering going to ART V2 939 so any perspective on proper fuse and stab choice appreciated.
I have had 2 sessions so far with the 939 and an adv plus ultrashort fuse, skinny 45 stab in challenging very gusty conditions and found this setup very well balanced. I am 70kg and have been using the HPS 930 with the regular short fuse as my main foil up until now. While the 939 on the adv plus is a fair bit looser it didn't take long to get use to it, the only part that I found a bit trickier is foot swap.
What speed do you get on the V2 939?
Sorry no idea, definitely faster than the hps930 and the sf840 though.
Select to expand quotepanpanace said..jrc22ski said..FoilWays said..
I've only had one session on it but I really think the range is comparable to the V1 Arts. The 939 sits in-between the 899 and 999 V1 and feels exactly like that. I would have felt much more over-foiled on the V1 999 in these conditions, and the 899 would have likely been a little faster. The 939 improves the low end on the 899 definitely increasing the range. I got the 939 because I was looking to improve the range of the 899 and also feel OK jumping it. I don't jump my V1 999, so I felt that replacing it with a 999 V2 would have been unnecessary given I REALLY love my V1 999 and it does everything I want it to do... except breach tips well.In general, I don't jump foils wider than 900mm, but the 939 is close enough. I'm not the biggest fan of the shape of the V2. I feel they are too pointy. I would have loved to see a shape more akin to the ART Pros, but with more chord... but ignoring the pointy shape, it really is a good foil.
i have been mostly riding HPS 930/1050 and occasionally ART999. I use Ultra Short Black Fuse (not Advanced) /375P stab.
I weigh 75 kg's, proficient at jibing and now tacking from toe side.
Not into jumping / freestyle but riding swell and waves.
I am considering going to ART V2 939 so any perspective on proper fuse and stab choice appreciated.
I have had 2 sessions so far with the 939 and an adv plus ultrashort fuse, skinny 45 stab in challenging very gusty conditions and found this setup very well balanced. I am 70kg and have been using the HPS 930 with the regular short fuse as my main foil up until now. While the 939 on the adv plus is a fair bit looser it didn't take long to get use to it, the only part that I found a bit trickier is foot swap.
Thx for the info.
It was suggested to me that I consider ART V2 939, Black Adv Fuse Crazy Short (comparable to my current Reg Black Ultra Short) and Progressive 300 stab. If I were to go Skinny, 363/50.
Select to expand quoteFird said..
?????
Those were the recommendations to me for the fuse and stab to go with the ART V2 939.
Select to expand quoteFird said..
?????
Those were the recommendations to me for the fuse and stab to go with the ART V2 939.
