Ive cut out both side and will fit my two louvered doors from my cabinet this one will house the compressors and Ill add a couple of PC fans if needed to flow the air thorough. The starboard side will house my stoves Kero tank Also trimmed in fridge space to make ready for the fridges
Select to expand quotecisco said..Ramona said..
Ok it wasn't today it was yesterday. Sailed up the coast to Geroa, Westerly freshened so headed for home. Only about 1 mile off the coast, two reefs in the main and a few turns on the headsail. Flat water but plenty of breeze. The SS tube that holds the turning blocks for the self steering gear control line bent in slightly. Just enough for the shackle pins to catch on the frame of the gear and bend the gears tiller and also bend the alloy push rod. Video shows the gear disconnected. All that was needed was a spectra brace and all this drama could have been prevented. Something to repair during the week.
I had to hand steer!
Just experimenting loading a video with out using Youtube.
[URL=i218.photobucket.com/albums/cc78/fishermantwo/IMGP1114.mp4] i218.photobucket.com/albums/cc78/fishermantwo/th_IMGP1114.mp4
Video took way too long to load.
Yes I tried using Photo bucket instead of Youtube but I think its a waste of time. The quality is not as good as Youtube either.
Select to expand quoteRamona said..
Yes I tried using Photo bucket instead of Youtube but I think its a waste of time. The quality is not as good as Youtube either.
If you want quality use Vimeo ...... vimeo.com/ ..... and no annoying adds
Big little screen is going up tomorrow just in time for the tennis , and a new anchor should happen tomorrow!
Still sorting tools , didn't do a before and after but having fun with the 10 year old brother sticker machine untill it finaly run out of Cartrage!
nice s/a , you must be having a lot of fun !!!! ?
whats in the impact box ............................ a hammer !!
whats wrong with the existing anchor ?
Select to expand quotesouthace said..
Big little screen is going up tomorrow just in time for the tennis , and a new anchor should happen tomorrow!
South Ace Have you filled the fridge with beer for tomorrows Tennis??
Select to expand quoteRamona said..
Might be a few fitting out tips for you in this video on Mingming2!
interesting rig !
Select to expand quoteSandS said..
nice s/a , you must be having a lot of fun !!!! ?
whats in the impact box ............................ a hammer !!
whats wrong with the existing anchor ?
The impact driver wIll l be my hammer until I get one!!
The anchor is from captain cooks old boat although it's a beast the secondary has gone missing and I would just prefer to make it bullet and idiot proof! 
Select to expand quoteHG02 said..southace said..
Big little screen is going up tomorrow just in time for the tennis , and a new anchor should happen tomorrow!
N
South Ace Have you filled the fridge with beer for tomorrows Tennis??
No ho2 busy day tomorrow didn't think of fridge and tenis for tomorrow but good idea! Is it a public holiday?
Did a little bit of sanding tonight
Also my fridge arrived at work this afternoon Ill take it home in the next day or so and make a start
Who knows might get a cold beer out of it by Sunday
Select to expand quoteandy59 said...
Are you going to oil or varnish hg
I'd like to varnish both of them Andy
I'll have to do the wooden peice along the sette as well at some stage the dam list only gets longer Andy you know what I mean
Went to go fishing with my boys a few days ago and noticed a strange noise from the motor. So lifted the engine box and saw the front fuel injector was leaking. Shut her off and saw the bracket was cracked in half. Luckily i had a spare in the boats collection of bits and pieces so did the repair while the boys fished off the mooring.
[URL= 
.html] 
[URL= 
.html] 
img.photobucket.com/albums/n49/Hallams/running%20smooth_zpspjdpxntd.mp4
Thats got two to many cylinders Guiltz and its Blue not a "RED ONE"
Just the same your Blue seems to run very nicely
One sanded ready for some cabots satin clear unless some ones got a better idea??
Thats a before photo Id like to keep all the wood as light in color as possible
The old latch I'm going to use to keep my stove steady on the gimbals
The only disappointment for me is it already conected and the way its made you cant remove the compressor from the ice box.
But Ill work around it would have been easier to install just make it a bit harder
The ice box when fitted realizes on the ice box corners to support what ever weight thats in the ice box is carried by the corners to what ever lower bench top you fit . I'm making a ply wood bench top to carry the weight of the Engels then add my Corian bench top on top and screw the Engels lid to the Corian and hinge it
Photos after I* opened the packaging this is the MB40V -A which means it can have the compressor moved to a remote location but only by a 1 meter may be 1.5 meter There is no hinges you supply your own when you fit your bench top. The fridge lid screws to your bench top and thats hinged Dinner time just finished work
Oh yes forgot put a 3 liter milk in there so you could visualize how deep it is
Select to expand quoteSandS said..
whooooooooooooooooooo.......................... beer fridge
absolutely Sands Might not have my Corian bench on top ,but the the fridge will be powered up by Saturday night ready for a coldie on Sunday
Nice video thanks Ramona Ill check out his other up loads
Ive been working back every night and might have to work Saturday But I only have to to cut out the ply wood bench top to fit it also make a mount for the compressor Ill try and glass some thing in before Saturday and cut out the ply wood bench top. and throw some wires and a fuse. Should not take to long. Might not look pretty but it will cool a few drinks for now.
Sorry I am going to use some Cabots satin clear I have here Andy on those old louvered doors
Im still not clear on how to mount the fridge yet.
The ice box has four of these steel brackets that take the weight , So I only really need mounting points to the cabinet which is 600 wide and the fridge is 500 wide leaving 50mm either side. I am thinking along the lines of a piece of wood 90 degree epoxied to the cabinet either side and some from of mountings attached to fix the fridge to.
So I am thinking of 4 pieces for timber two for either side and make a 90 degree join on each side (glass and screw them)epoxy and screw those to the cabinet and then deal with the mounting to the fridge. some thing like a wood V so it catches the mounting point and screw the fridge down on to that on all four corners. I can shim the the fridge to the right height so the lid will sit flush with the bench top when part of the fridge lid is attached as part of the bench top .
Fitted the new BEP power distribution panel and battery monitor.
Looking forward to tearing out all the dodgy wiring and chucking the old board out over the long weekend.
The plywood insert is temporary for the engine hours instrument.
[
Removed the 30 year old deck organisers I wonder how much life there is left in them
There is a millimetre or 2 of play in some of the blocks
