Select to expand quoteTassiedevel said..
Job for the day - final polish on this little board - amazing how much better a job you can do when you have nothing else to do
Very nice work mate.
Select to expand quotebeachandbush said..
Who's downloading the government tracking app.
Not me, but being that I leave my phone at home most of the time, they ain't going to get much data out of me.
Too much big brother.
Check out the shirt on this bloke....
"1984 - Make Orwell Fiction Again"
That's about where I am.
Select to expand quoteTassiedevel said..
Job for the day - final polish on this little board - amazing how much better a job you can do when you have nothing else to do
Nice!
Select to expand quoteSP said..
A lot of you blokes would be **** out of luck in NZ. 
Is that fair dinkum ?
Wonder why the 2 meter cut off point ?
Select to expand quoteMickPC said..Tassiedevel said..
Job for the day - final polish on this little board - amazing how much better a job you can do when you have nothing else to do
Nice!
Thanks fellas - have another one from 12 months ago about 6 6 needing a final sand / polish as well - Get to that stage and so close to being finished get impatient
Job for tomorrow
Isolation project nearly ready to glass,bit of fine tuning and once completed then on to 9'6 single fin
Select to expand quoteTassiedevel said..
Job for the day - final polish on this little board - amazing how much better a job you can do when you have nothing else to do
Very nice 
Select to expand quoteRicardo1709 said..
Isolation project nearly ready to glass,bit of fine tuning and once completed then on to 9'6 single fin
Amazing job Ricardo , love people with hand skills. That looks like smoking good shape.
Select to expand quoteCobra said..
mac would you sacrifice Mac T to end it?
Of course I would mate.
Select to expand quoteCobra said..Ricardo1709 said..
Isolation project nearly ready to glass,bit of fine tuning and once completed then on to 9'6 single fin
Amazing job Ricardo , love people with hand skills. That looks like smoking good shape.
Thanks Cobra still a way to go, just gotta make sure I'm not on the beers when I'm mixing the catalyst in to laminating resin, that's been my undoing in the past and I don't want to screw this one up as it's a nice shape As a side note there are some great waves around the area today get out there then get home
Select to expand quoteMacaha said..Cobra said..
mac would you sacrifice Mac T to end it?
Of course I would mate.
Lets do it.
A new world
Select to expand quoteRicardo1709 said..
Bit less tide and will be nice
Yeew. Plenty of swell around.
Board looks sweet too.
Select to expand quotelaceys lane said..Macaha said..Cobra said..
mac would you sacrifice Mac T to end it?
Of course I would mate.
Lets do it.
A new world
Good old fashioned pagan sacrifice..
Select to expand quoteMacaha said..Cobra said..
mac would you sacrifice Mac T to end it?
Of course I would mate.
Select to expand quoteRicardo1709 said..Cobra said..Ricardo1709 said..
Isolation project nearly ready to glass,bit of fine tuning and once completed then on to 9'6 single fin
Amazing job Ricardo , love people with hand skills. That looks like smoking good shape.
Thanks Cobra still a way to go, just gotta make sure I'm not on the beers when I'm mixing the catalyst in to laminating resin, that's been my undoing in the past and I don't want to screw this one up as it's a nice shape As a side note there are some great waves around the area today get out there then get home
Had that happen once - very hung over , epoxy resin hot coat on a wooden board - not fun , had to scrape /sand back to wood and start over .Went through about 10 packs of 80 grit paper getting it off 
Nice shape mate going to be a single fin ? What are the dimensions
Select to expand quoteNozza said..
Be careful what you believe. Don't think I posted it at the time, but my daughter Louise sent me this picture of signs that went up at every beach access point on the Surf Coast prior to March 28.
Being in the graphic design industry, she picked that the Surf Coast Shire logo was a bit stretched.
Just an enterprising local getting out there - got to admire his initiative.
Those signs might be bull**** but the rozzers in teh carpark checking rego's and handing out fines aren't.....have seen them all over the place in the last few weeks...
Select to expand quoteTassiedevel said..Ricardo1709 said..Cobra said..Ricardo1709 said..
Isolation project nearly ready to glass,bit of fine tuning and once completed then on to 9'6 single fin
Amazing job Ricardo , love people with hand skills. That looks like smoking good shape.
Thanks Cobra still a way to go, just gotta make sure I'm not on the beers when I'm mixing the catalyst in to laminating resin, that's been my undoing in the past and I don't want to screw this one up as it's a nice shape As a side note there are some great waves around the area today get out there then get home
Had that happen once - very hung over , epoxy resin hot coat on a wooden board - not fun , had to scrape /sand back to wood and start over .Went through about 10 packs of 80 grit paper getting it off
Nice shape mate going to be a single fin ? What are the dimensions
Its 7'0 x20 1/2 x 2 3/4 and still undecided as to fin set up.
Im definitely putting a box in for a single but thinking FCS2 sides so I can surf it as a thruster as well and also have the option of making some twin and bonzer fins with can't built in to tabs, got a few ideas just need the time to do them.
Dont think ill ever buy a finished board again,Im hooked on making my own now, its great fun and very addictive
Select to expand quoteRicardo1709 said..Tassiedevel said..Ricardo1709 said..Cobra said..Ricardo1709 said..
Isolation project nearly ready to glass,bit of fine tuning and once completed then on to 9'6 single fin
Amazing job Ricardo , love people with hand skills. That looks like smoking good shape.
Thanks Cobra still a way to go, just gotta make sure I'm not on the beers when I'm mixing the catalyst in to laminating resin, that's been my undoing in the past and I don't want to screw this one up as it's a nice shape As a side note there are some great waves around the area today get out there then get home
Had that happen once - very hung over , epoxy resin hot coat on a wooden board - not fun , had to scrape /sand back to wood and start over .Went through about 10 packs of 80 grit paper getting it off
Nice shape mate going to be a single fin ? What are the dimensions
Its 7'0 x20 1/2 x 2 3/4 and still undecided as to fin set up.
Im definitely putting a box in for a single but thinking FCS2 sides so I can surf it as a thruster as well and also have the option of making some twin and bonzer fins with can't built in to tabs, got a few ideas just need the time to do them.
Dont think ill ever buy a finished board again,Im hooked on making my own now, its great fun and very addictive
Same here mate - completely different experience making and surfing your on boards - last 5 7 I could not decide on fin set up - ended up throwing in a centre box and 4 gearbox side boxes .Seems to go best with 2 plus 1 set up
Have an 8 foot blank ( block of EPS ) in the shed trying to decide what to make out if it .
Select to expand quotelaceys lane said..
haha some alternatives for yuz.
duckduckgo.com/
Very interesting when searching certain keywords in comparison to goog, like "corona virus hoax"
brave.com/
A better browser
Facebook, who needs it when we have Mac & Lacey on Seabreeze
Select to expand quoteRicardo1709 said..
Isolation project nearly ready to glass,bit of fine tuning and once completed then on to 9'6 single fin
Nice!.....uggies....I like the board too
