Rons boards are unreal, I also agree how he puts a pin or rounded pin in his HP boards.
Yeah it's a good thread, shame we lost the Tassie to the dark side
He always did have devil in his name, maybe he was sent from the dark side on a recruiting drive...
Ha but look what Lacey turned intoyou don't see him gracing the evil dark room anymore
He started a topic on long 666 boards the other day - he still loves it. I would not be surprised to see him on another 666 shortly. He changes his mind more than most change their daks Ask him about the changing state of shortboard collection
Ha but look what Lacey turned intoyou don't see him gracing the evil dark room anymore
He started a topic on long 666 boards the other day - he still loves it. I would not be surprised to see him on another 666 shortly. He changes his mind more than most change their daks Ask him about the changing state of shortboard collection
Thats a Qld thing bro....all that warm weather and girls wearing bikinis around messes with the decision process
Look at everyone beating on poor ol' Roy... AGAIN
But I would point out (and it pains me to defend him ) that whilst we might disagree, Roy would be the only person on this forum who's made/making a successful living as a shaper soooooooo...
And lets face it, we all know whats best when it comes to board design, I mean listen to this idiot
www.seabreeze.com.au/forums/Surfing/Longboarding/whats-happening-in-the-Goddard-shed/?page=1
andyroomac, have a look at this one, absolutely Magic thread top shelf shaper, you won't find a bad word said about Ron Goddard. Generously showed everyone how it's done, no blowing of trumpets, no insults, egos and anyone who visits this room would welcome another thread just like it anytime. If I was on that side of the country I would get a ripper board off ron.
I read that whole thread while I was having a feed. it is such a great read. should be a permanent sticky at the top of the page....laurie? how is your free range egg going ted?
Look at everyone beating on poor ol' Roy... AGAIN
But I would point out (and it pains me to defend him ) that whilst we might disagree, Roy would be the only person on this forum who's made/making a successful living as a shaper soooooooo...
And lets face it, we all know whats best when it comes to board design, I mean listen to this idiot
www.seabreeze.com.au/forums/Surfing/Longboarding/whats-happening-in-the-Goddard-shed/?page=1
andyroomac, have a look at this one, absolutely Magic thread top shelf shaper, you won't find a bad word said about Ron Goddard. Generously showed everyone how it's done, no blowing of trumpets, no insults, egos and anyone who visits this room would welcome another thread just like it anytime. If I was on that side of the country I would get a ripper board off ron.
I read that whole thread while I was having a feed. it is such a great read. should be a permanent sticky at the top of the page....laurie? how is your free range egg going ted?
Look, I totally agree, Roys capacity to communicate on any reasonable level falls into the Tony Abbott/George W club. My point is that the forum is p00 p00ing his shaping theories but at least he's kinda putting his ideas into practice and making things that people buy... The rest of us really are just talking bs
Btw @chrispy, didn't you buy one of his finz? Where's the review dude
Look, I totally agree, Roys capacity to communicate on any reasonable level falls into the Tony Abbott/George W club.
BS to that, my posts are reasonable. What exactly do you think is wrong with my communications skills?
I've not only been logical and informative with my answers I've been restrained in the face of a lot of abuse including the suggestion that I'm a sociopath, which is a pretty damn rude thing to say and is defamatory to boot. No one commented on that particular piece of 'communication' now did they?
Anyway thanks for correctly stating that I actually make stuff for people.
I just stumbled on this thread although this dude is obviously stuck in a time warp he does look to be a bit of a craftsman. Are there any vids around of anyone riding one of these boats in serious waves?
+1 the craftsmanship on the wooden boards is top notch. It would be nice to have one in the quiver provided it was a shape suited to your local waves & your particular surfing style. I haven't seen one suitable for me for surfing, but it would be cool to hang one up on the wall...if I had a big enough wall.
Roy has some surfing on his channel riding them in some nice waves & a Randy Rarrick bloke rode one in overhead Hawaiian waves. Pretty sure the vids have been posted to this thread already.
Perhaps these boards my mate is making might be more suitable
Ha but look what Lacey turned intoyou don't see him gracing the evil dark room anymore
He started a topic on long 666 boards the other day - he still loves it. I would not be surprised to see him on another 666 shortly. He changes his mind more than most change their daks Ask him about the changing state of shortboard collection
why its all new to me ted- the shortboard caper.
and I haven't given away 666's - never did. toning back is what I said.
are you sure you don't work for some low brow newspaper and beat up stories as a living
ps. somebody put some true serum in my protein shake.
that 12'6 bullet has gone back. I didn't realise they up graded the shape and went wider, changed the rocker- don't like it
that 12'6 bullet has gone back. I didn't realise they up graded the shape and went wider, changed the rocker- don't like it
OMG
that 12'6 bullet has gone back. I didn't realise they up graded the shape and went wider, changed the rocker- don't like it
OMG
yes. Im disappointed and ought to be whipped and even then I could count myself lucky I reckon
I heard your growing a beard and getting into retro 666's WTF, you need more than a whipping fella
Whats next surfing with an open short sleaved button up shirt
Ha but look what Lacey turned intoyou don't see him gracing the evil dark room anymore
He started a topic on long 666 boards the other day - he still loves it. I would not be surprised to see him on another 666 shortly. He changes his mind more than most change their daks Ask him about the changing state of shortboard collection
why its all new to me ted- the shortboard caper.
and I haven't given away 666's - never did. toning back is what I said.
are you sure you don't work for some low brow newspaper and beat up stories as a living
ps. somebody put some true serum in my protein shake.
that 12'6 bullet has gone back. I didn't realise they up graded the shape and went wider, changed the rocker- don't like it
Should we stand by for an artwork thread....or is that Mac only territory?
Mac art zone only.
You know the rules
Yer cigarette packets of bygone years
55 pounds @ 13-9
Very ZEN Roy
Was that you twin @3.15 mark?
Son Tristan, he spends most of his time boxing ( NZ light heavyweight champ) but slides a few now and then.
The first video of the 13-9 Dragon is at The Blowhole, Main Beach Mount Maunganui, the second is at Manu bay, Raglan.
Here's the Dragon at the point again, having a bit of trouble with the lump and bumps and standing a tad too far back:
I think Manu will be the answer I was looking for
EDIT - 12 pages ! Wow the thread that just keep on giving. How is the glassing going Roy? You sanded it back yet?
Roy I'm a manufacturing genis,raw materials can blow out during the process.
I recommend you cut off at least 3 foot from the nose end,because I can't see it
being used.
Back into it tomorrow Ted, I've done epic amounts of sanding and fairing due to the 3D glassing difficulties, so she'll be a spotty looking dog but we'll put it down to prototyping. Board is pretty fair now and strong, plus the weight is now quite good probably about 18 to 20 will have to check. I'm going to get some conventional 6 and 10 ounce glass to save my sanity, but will have another crack at the 3D glass on the 66-021 ( the one with the side cut, up next)
Roy I'm a manufacturing genis,raw materials can blow out during the process.
I recommend you cut off at least 3 foot from the nose end,because I can't see it
being used.
Lol of course not it hasn't been in the water yet, suggest sanding 3mm off your own nose, I can't see it but it might have a wart on it.
I just stumbled on this thread although this dude is obviously stuck in a time warp he does look to be a bit of a craftsman. Are there any vids around of anyone riding one of these boats in serious waves?
+1 the craftsmanship on the wooden boards is top notch. It would be nice to have one in the quiver provided it was a shape suited to your local waves & your particular surfing style. I haven't seen one suitable for me for surfing, but it would be cool to hang one up on the wall...if I had a big enough wall.
Roy has some surfing on his channel riding them in some nice waves & a Randy Rarrick bloke rode one in overhead Hawaiian waves. Pretty sure the vids have been posted to this thread already.
Perhaps these boards my mate is making might be more suitable
Man those look sweet. I think more info is needed. Any video of them being surfed, but i think they need their own thread
Roy I'm a manufacturing genis,raw materials can blow out during the process.
I recommend you cut off at least 3 foot from the nose end,because I can't see it
being used.
Lol of course not it hasn't been in the water yet, suggest sanding 3mm off your own nose, I can't see it but it might have a wart on it.
Go easy Roy , we already have Ted the Kiwi and Flight of the Conchords here!
I think Manu will be the answer I was looking for
EDIT - 12 pages ! Wow the thread that just keep on giving. How is the glassing going Roy? You sanded it back yet?
Now for the next 12 pages (WHAT NO LEGROPE)