Here is one of my CFD simulations study , Low pressure distribution (lift, blue ) on outer surface for both airfoils looks the same , but different on windward surface . Leading Edge stall dramatically changes high pressure distribution on inner surface. This is what makes curved plate profile unstable and inefficient.
Good one Stan. I wish you the best in your quest to better understand airflow around traditional sail and wing.
I love my race sail !!!! . Send me a demo sail
Hope your staying warm over there, nice and sunny here
All this theory and cfd both with absolutely nothing behind it as no one has actually determined the conditions this would operate under every technical post in this read is just meaningless. These are not facts of the wing sail but a sales pitch with a convenient interpretation.A race sail rigged right with the right fin and board is super stable once you get to a point of ability/ rig tuning/ confidence you have just fly over massive chop and swell with the balance of sail and board looking after everything it is amazing how locked in the whole set up is I can easily do 33 knots over the back of chop with only one hand resting on the boom. The race sail is the easiest style to sail at speed for a reasonably experienced sailor. I'm not claiming its more stable or easier than yours but please don't try and perpetuate the myths about them being heavy and hard to sail they do have amazing stability built into them which undoubtable is front the active twisting and flexing. All these wing profiles are the perfect shape for what they do the glider has the best l/d , the f1 has a huge c/l plus does alot extra in its job, the short take off plane has huge lift at the expense of drag the fighter jet has swpt wings because of pressure of high speed fligh( im sure there is more to that one but i have no idea) The propellor has alot of twist to allow for different apparent wind angles anlog its length.
There is not one best shape based on 2 dimensional simulation of and airfoil profile, the puzzle is far more complex than that.
MW, your comments about race sails may be valid for your sailing spot but not for mine. Yesterday we had 40+ windsurfers on Moreton Bay Brisbane. 80% of them were on race sails and recorded their speeds etc on GPSTC. I weigh 88kgs. I used a 7.9. The wind slowly built from 13 to 20kts. I sailed comfortably all afternoon.
Hello one and all,
I have been reading what everyone has got to say to the make of these sails, but firstly as some of you seem far more educated in areodynamics than anyone who I have every worked with I thought that I might need to say who I am.
I have worked for some of the biggest sail makers in the world, designed AC sails and worked on sail rocket project, also I have worked for F1 as a front wing designer so my credentials on this matter I believe are ok.
Why are people asking such ridiculous questions about angles of attack, like these people are going to correct the designer.
Double skin sails on the right craft are quicker, no questions. Putting up pictures of lasers, sailing with their tel-tales flying is totally rubbish.
Sail rockets sails have hardly any twist and its done nearly 65 knots.
F1 front wings are not there for their wind releasing ability, they actually force the car down putting more wight through the Axel, thus into the tyres.
This bloke who is making the sails has come up with something new within our stagnant sport. Gaastra tried with their total flow head system and then canned it but this bloke at MW should be applauded not criticised by people with far too much time on their hands and have their heads up their own arses.
Until proven otherwise be grateful someone is trying to keep our sport alive with new ideas......We;; done I say....