thats a really loud audio on that vid !!!!! but great quality vid what sort of camera is it , some sort of gopo?
really interesting vid !!!!!
www.camerastore.com.au/
neeeeeeeer sands my search engine worked better this time $270 cheaper than yours
www.google.com.au/search?q=Pentax+WG2&ie=utf-8&oe=utf-8&client=ubuntu&channel=fs&gfe_rd=cr&ei=KpQrVY_6K8iN8QfVhIDQDg&gws_rd=ssl#q=Pentax+WG2&channel=fs&tbm=shop
Gee you've got some clear water there, Ramona! Nice camera. Only 40 feet so as a diving camera it's a bit limited but good for most stuff and looks rugged.
Caught two squid tonight , and 7 on Sunday.
Two is the minum for a appetiser ..........
Dinner is just 300 meters from my Marina berth!
I will improve on my crumbing technics and also add some Lemmon pepper!
Lot more than it had. The new DV24 pump puts out more water than the old early 6 bolt flanged DV20 pump I had
Ive an earth problem with my oil and temp gauges. Ill have to work through at the weekend find out what the problem is. Then wire in couple of side navigation lights and up grade my fire extinguishers and Ill take her for a motor out in the bay.
Two nice things happened today Bubbles posted me bottle of his rocket fuel which Im saving for when the mast go back on the boat . Many thanks Bubbles
I had enough of my old work some times and not the other Multimeter ,this one has a temp probe which will be a nice addition
Tried the reset button top right. Then switched dial on engine battery to All tgen back to 1, and the batteries are now all showing as charged. Stuffed if I know...!!!???
I ran 13 meters of three core tinned wire from my cockpit to the new anchor windlass that was fun NOT!
And I have added down foot switch on the bow so now I have up and down from the bow and the stern!
Next job is the holding tank and new TMC electric toilet .....got some fittings today and have found some better flexible suction hose than the White painful stuff.
Had a good sail on the weekend with full main and headsail......6 knots in 15knots of SE breeze....not bad for a 12 tonne tub.
Also ran .lots of twin core and wired in my nav lights' and added a bilge pump outlet so I have a separate one for my electric rather than untilizing the manual bilge pump outlet which I had been doing
I'm curious about the placement of those navigation lights? Will they meet the visibility requirements when heeled?
problem solved "AYE" Mc Nautical.
A thought did enter my mind concerning did Mc Nautical blow the fuses deliberatively to get the fridge mechanic back??????
Did a bit more on the stove fitments today only had a few spare hours.
I reduced the width by 10 mm on the stove shroud, so I could gain enough room to epoxy a piece of ply to the inside on the settee side.
Ill make up a small hull bulk head and fix it down I have seen a few stove gimbals fall apart in rough weather and I dont want it to happen to me if I can help it. It might hapen with my last can of bake beans
Might move the stove forward slightly yet maybe by 50 mm that piece of timber is only temp in front of the stove a stainless pipe will be fitted there.